brakes

Hello Driftworks community! I’m looking for some much needed assistance. I just installed an inline PSM hydro, in my ‘02 C5 Vette. After properly bleeding the system, I am having an issue with the rear calipers locking down….with any foot pedal actuation. This pressure can only be released via...

Hi guys, Could someone with experience shine some light on this please? I can't find a concrete answer anywhere, so could anyone confirm what brake discs & pads go on 1999 Mark II JZX100 (1JZ-GE)? It's a nightmare to find what fits. Any cross-compatibility with 1JZ-GTE cars or some early...

Hi everyone, I’m sure this question has been asked countless times but would just like to get some updated info if possible. Am I correct in thinking that I need RCA spacers along with the longer bolts for the callipers to fit? Or do I need an adapter for the caliper carrier? It’s the first...

Hi all! I have a set of Porsche Boxster S 986 Brembo brakes lying around and would like to fit them to my Silvia S15. Has anybody done this brake conversion before? If so any tips/parts you used? Any advice would be much appreciated! Cheers

Hello to all! Due to change of opinion I put on sale my braking kit that was intended for S13, I include braking screws quality 12. Possibility to sell together or separately (not per unit). Price: 350z calipers with screws: 500 EUR 300zx calipers (complete): 250 EUR Tomorrow I'll update...

As title, I have a Crown and need to replace the rear brake shoes and fittings etc. Is anyone able to confirm if brakes from similar vehicles would fit? I'm quietly confident that GS300/is200 rear brakes of the same era fit but it would be good to hear from someone who knows for sure.

Does anyone know if the r32 GTS (4 LUG), r32 GTST and r32 GTR use the same drum brakes Cheers

The thread has stripped off on my caliper where the brake hose goes. :( Does anyone know where I can get it repaired? Kishan

Hi all, I'm looking for an S13 ABS pump with n/s/f (front left) brake line that goes from the pump to the wheel arch. Images below with part number which must match. Must be in working order with no leaky seals as looking to replace current pump which is leaking.

So I've bought a 1.6 NB 2002, it has some minor issues that include the rear brakes. After reading the forums a bit I understand that the 1.8 has different (better) brakes than the 1.6? I can't seem to find these brakes online tho. Any idea how to find these? Do all 1.8s have them? Are they a...

I'm looking for some parts to use for a subframe swap on an old Datsun. I need a complete rear s13 subframe with 4 bolt hubs, brakes, handbrake cables etc. Also looking for s13 front hubs with 4 stud hubs and brakes.

Hello! im on the hunt for z32 rear brakes for my s13. Assembly Rotors Calipers pads R33 cables Seller has to be able to ship to Sweden :D //// Marcus

ORC single plate clutch - removed due to doing a 6-speed conversion, worked fine but while it's out I'd recommend replacing the clutch disc, can be sourced easily enough - £195 URAS Type-S Monkey Magic full kit - A couple of small repairs that haven't been done great, paint isn't...

Hey, I'm looking for, as the title states, either R33 or 34 GTR brakes, looking to upgrade my GTS brakes from stock. Any images to go alongside anyone who has any for sale would be great, Cheers guys!

Looking for big brakes for my r34 GTT Looking for D2, K Sports, R34 GTR, 350z and so on.. offer anything that would fit and is working. Living in germany ofc will pay for shipping greetings!

Hello there! im on a lookout for a nice set of rear brakes for my s13 :) its 5 lug swapped as the title says. Im located in Sweden so shipping is a must :D Z32 brakes will do just fine or something else. im opened minded. could even be used calipers aslong as they are in okey condition :) /...

Hi all! Am suffering from a known issue when it comes to drifting. When pulling the E brake and pushing the pedal brake at the same time some sort of pressure is remaining in the rear calipers when i get off the brakes. Not sure if you guys can understand but when using both E brake and foot...

Due to swapping for a bigger setup, i don't longer need this stuff OEM S14 front Calipers. They have been freshened up about 1 1/2 years / 12k miles ago. They've been taken apart, sandblasted, got new Pistons and gaskets and have been powder coated black. No discs or pads included...

So the front passenger side brake on my e30 isn't working... I took off the brake line and when pumping the brake pedal fluid starts to be visible at the end of the line, but doesn't come out the way it should. How should I go about dealing with this?

Hi all, Im going to be fitting the R33 GTR brakes front and rear from my old 14 onto my ps13. Now... Looking at the BMC on the 13 it has 3 outlets FL, FR, R. Its a non abs model. The bm57 I have from the s14 only has 2 outlets. Front and rear, as it came off an abs car. Would I be right...