engine swap

Hey guys doing a motor swap on my s13 currently a sr20de. Putting in a sr20det from a s15. anyone that’s done this before able pm me regarding the wiring. I have both loom/pin outs and have a rough idea what I need to do but would just like to clarify it all before starting thank you

i have an s13 with an rb25 an an r33 subframe. my problem is that the engine sits too high with oem engine mounts. i have found shorter mounts but these puts the engine more back and i dont know if it will fit with the head drain kit i have on the engine. is there anyone that have the same swap...

Hi, I'm after an SR20DET if anyone has one for sale, preferably a running engine in good condition. going to be used in a swap so if it can come with an ecu and a loom that would be very helpful.

Looking for a M50B25 Single Vanos to fit into my E36 compact, plan is for a future turbo build! Will consider anything offered. Cash is here waiting... BARE OR COMPLETE ENGINES?

I have a 2004 bmw 320cd coupe and was looking to put a petrol 3L engine in it? would it be worth it as the body is in really good condition, no rust underneath or just get rid and buy a 330ci? What parts could I keep and what parts would need swapping? gearbox, engine, ecu, ews?, dash I know...

I recently bought a Ae86 and was wondering what’s a common (affordable) engine swap for a drift build?

I recently bought a Ae86 and was wondering what’s a common (affordable) engine swap for a drift build?

Hi guys, i was wondering if anyone would know about changing the whole setup of a carina. I have a 1.6 1985 toyota carina, everything is stock at the minute but the setup just doesn't do what I'm looking for. I want to convert to RWD and put a bigger engine in (over 200bhp) but I'm not sure how...

Hi guys, I've decided to bite the bullet and change out the SR in my S13 for a 1JZ-GTE VVTi. This will be the build list, any ideas will be much appreciated: - 1JZ-GTE VVTi w/stock loom and ECU - PMC JZ-M57 gearbox adapter plate w/custom flywheel - S14 subframe - Clark Custom engine mounts...

Hi! Recently purchased my first S13, a fresh-ish imported Sil80 Its come with some nice goodies on it, some RAYS Compionato's, Blitz coilovers, Apexi Exhaust, Sparco seat and a few hks bits under the bonnet, air filter etc...Very Clean underneath Only 'problem' is its a non turbo SR20DE My...

Firstly I would like to say hello!! I am Wojciech I come from western Poland. I am a sympathizer of the skid. Today, during my return from work, my babybenz began to make strange noises from the engine, I'm pissed off again. I think the time has come to do something with my outdated m102. I...

The Beginning Welcome to my, so far, 2 year project. In April 2016 I found an AW11 MR2 in dire need of saving when I went to a lockup owned by one of my dad's friends. A plan was hatched, and for the small sum of £50 I saved it from its airsoft playground grave. It was a right...

Hi guys, I am new here and i hope i can get some help and advice from this forum... I am currenly thinking about buying a bmw e46 316I Sedan (1.8 engine) and my question is... For what engine can i swap the n42b18 so there is not too much problems with the actual swap..? I am Looking for at...

Hello, I'm thinking about how I want to upgrade my MX5's performance. I've considered other engine swaps and also a turbo. I think it would be really cool to have the 2.0L inline 6 engine from an is200 and they're not too powerful for an mx5 and would have a really nice sound. Also you can...

picking up that car tonight (12 october) was a barn find chassis is rotten but everything else for sale Rb25det and manul box will be good for a conversion Rear brake set up are a known conversion for s14s Will get pics tonight Let me know what you want and ill get detailed pics

Hello, can anybody help me on my quest for a 325 M50 engine ?

hi guys looking to sqeeze a cummins into an ls430 or wagon mercedes as a drift project, first of all is this crazy??? anyone ive mentioned this to think im insane haha. also does anyone know what would suit better, the 4bt or the 6bt??? cutting or fitting is not an issue as I am qualified to...

I'm going to do an engine conversion on my E36 318is. I'm not sure whether to go with the 325i or the 328i engine. any help or advice would be great! please post build threads if you have any. cheers guys!!

I am buying a BMW e30 m40 willing to see opinions on engines that I should use, now I am thinking of an LS or a 6 rotor or maybe a 2jz. Need opinions on what engine I should use and which is more unique. Thanks.

Hi there, needing some help please. Concerning this conversion. The issue I'm currently facing. Whilst the car is in neutral - idling is 100% spot on. Revs are pretty decent but does not exceed roughly 5000rpm... under load, through all the gears I can't exceed 3000rpm. The revs limits and it...