forged

Mazda Mx5 2006 mk3 Chassis on 86,300 miles, however this will rise as I'm still using the car occasionally Engine 2.0 mzr closed deck alloy block Forged H beam rods rated at 800hp Arp rod bolts Cylinders had a fresh hone New Nc2 fully floating pistons Fresh King bearings Fresh oem mazda...

For sale very rare Rays Nismo LMGT4 r17 4x114.3, front 7.5j et 30 and rear 8.5j et 30. No tyres. The wheels are in good condition. 900€ + shipping. Italy

Sparco Viper R 17"x8.5j 5x114.3 +31 17"x9.5j 5x114.3 +35 Rare, extremely light forged wheels manufactured by Taneisha Japan Approx 7.4kg and 7.5kg per wheel Price: £850 + shipping/paypal Location: Ireland Posts to: Worldwide

I am selling a rare set of ZEIT 5-spoke forged wheels. No damage. Made in Japan by Taneisha. Faces were repainted recently. Original stem valves, original centre caps. Custom made chrome stickers. Specs: 9.5x17 (all 4) Offset 23 5x114.3 Made in Japan in 1995 £800 ono Will send EU wide.

hello guys, finally, after a long time, there are, I need some advice, I ordered all the spare parts for my ca18det, I wanted to get 500hp, as I had communicated, some time ago, but I thought about it, I will aim to get 300-350cv so i bought these pieces 1 - piston CP 84mm 9.0.1 2 - Eagle...

For Sale Nissan Skyline R33 GTS-T. Car's been untouched for the past 2 months and requires new clutch and flywheel to get running along with some possible engine work. Did run like a dream, boosts like no tomorrow! Gearbox changes gears without a crunch. Fortune has been spent by the previous...

Hi people. So, my SR is getting a bit further with the rebuild. Head is all skimmed, valves reseated, BC springs and retainers, new BC guides. Black has been decked, put together with Manley rods and CP (8.5) pistons and bored out to 86.5mm with all new Duraglide shells and I also had my crank...

Hey guys. I'm offering for sale a set of forged original LMGT4 wheels from 1999 with the following specs: 2 of 17x8.5 ET35 2 of 17x9.5 ET38 PCD 5x114.3 CB 66.1 GT-R center caps RAYS titanium lug nuts Fronts have 225/45 Nexen Nfera SU Rears have 255/40 Nexen Nfera SU Rears have good thread, all 4...

Hi all, I am looking for an SR20 straightcam for my rps13 which has just blown it's engine. Ideally a low milage forged engine but if you have a fully working stock motor for a good price, i may consider. Cheers. Lew

Selling this to fund my trips to driftland. In my ownership the car has been faultless, It took me about a year to build and I think this is the perfect all rounder and would suit either a beginner or advanced driver looking for reliability. It isn't your usual rusty sbody with an sr thats...

Super rare (only set in the UK as far as I am aware) genuine TOM's VP8's - 19x9.5 and 19x8.5 with Potenza RE050a custom painted with polished lip - some pitting on the lip but very clean otherwise with no scuffing - WILL SWAP FOR 18x10 / 18x11 WHEELS + CASH EITHER WAY 8.5x19 et45 Front 11.1kg...

Oh hai. Better late than never, I've been wanting to do this for a while now as I would like to document progress as the car gets built. Whether people look and read it I don't mind, I'm doing this more for myself. First off its a 04 MX-5/Roadster/Miata (where're you from fam?) with a...

Well I though it's about time I done one of these as I've had the car nearly 7 years and it isn't going anywhere. Here's how it looked when I bought it. Skip forward 6 and a half years (missing out all the idiotic things I did) and here's how it looked before drift matsuri in Anglesey...

Okay so after owning and working on the car for several months now and reading through dozens of threads on here for inspiration I finally figured I'd start up my own. I've been following drifting for a good 5 years now (I'm 19 years old), and ever since I went to my first event and started...

Now sold!

These are a pair I had left over from a set that didn't suit my offset requirements. 17 x 8j ET45 114.3 - Forged and silly light. No tyres, No caps, No valves Straight wheels, no cracks or buckles and only minor kerbing. They were balanced up from the previous seller with tyres and have not...

please delete, I've decided to keep the car :)

I need an engine asap for my s14 got cash waiting. Would like a stroker or a forged block. But may even just use a standard. Pm me please or message me on 07718486987

Got a full ca18det bored to 84mm forged wisecos, brand new acl race bearings on all rods and mains engine done 0 miles since rebuild.as head gaskets leaking water into cylinder 3, think.decks warped as whole cylinder head was refurbed and skimmed, got pictures and receipts for engineering...

Looking for a forged or strokered sr20det. Must be warn in or have warranty. Give me your offers. Need one asap. Could do with a new gearbox aswell