fuel

Hello everyone, I just bought a jzx100 with the 1jzge and was wondering if anyone could point me in a good direction on where to find parts for it? I'm not new to cars but certainly new to imports as I started learning about this car basically the same time I bought it. I was also told that the...

Hello. Does anyone know if a 300zx fuel pump hanger/cradle would fit on a 200sx? Can't seem to find any decent s13 ones for sale

Hey all, forgive if in the wrong area. You're literally my last hope, as I'm out of ideas. I'm experiencing massive lean issues when driving. It only occurs when in vacuum-off boost. So, motorway driving, cruising or slight acceleration off-boost. I'm observing this on an AEM UEGO thats...

Hi guys, I'm looking for a fuel tank for my drift car, I need 2 of them (one for me and one for a friend of mine). We are low in budget so looking for used tanks, but we need them with valid homologation . Thanks!

OK I'm new on here first time posting but been following threads on here a while now. So basically Iv bought my first project. It's an e39 530d manual. Plans as a drift slut, have it stripped out bucket seat and welded diff, cars been lying up about a year though and won't start, will start...

Hi guys, i just want to know what fuel filters are you running with 044 and in what order ? Do you know about any Bosch OEM filter that works fine with 044 ? Im thinking about 0450905021 - i found it in a lot of e-shops as "performance / motorsport " fuel filter. Yay or nay ? Any info ?

2000 S14a Black Top. Front right tyre buffed through engine loom as they tend to so I cut damaged ends and twisted wires to get the car to run. I then one by one cut and extended each wire and routed the loom through the engine bay. The car now turns over with spark but won't start. Fuel...

Wanted: SR20DET Stock side feed injectors (purple 370cc)

Hey all, After a full AFR setup for my 3a S14a; I'm in the Maldon Essex area and I'm happy to travel a bit or pay for courier. Thanks in advance. Chris.

Change of plans in project Nuke Performance Fuel Pressure Regulator adjustable from 35psi to 90psi Brand new, never seen a engine bay in it's life. High quality Billet aluminium alloy 6082 Comes with one dash 8, one dash 6, one plug and stainless steel brackets. Suitable for regular petrol...

Yo dudes.. Im making my own fuel cell, it's an all Alu box, will have 2x intank pumps.. Obviously I need to get power to the pumps.. The last fuel pump carrier I made for my existing tank I used nylon washers with a bolt through to stop the power arking against the metal.. Although this...

hi i am looking for some low priced injectors for an sr20det must me 555cc or over

6x480cc S15 side feeds fit spec one or two RB25. £350 6x650cc denso top feed came out of Ricky Bobys RB26 recently, may also fit RB25 neo. £350

alright so as the story goes i went for a late night cruise in the 180, on my way back i noticed my fuel pressure light kept flickering on mostly at low rpms i checked the oil and the level had rised since the last time i had check it and it looked a bit gassy, the next morning i went to take my...

Yo dudes, Thinking about buying these injectors, they look a bit shit though.. The mesh bits on the sides look fucked, can those bits be replaced? Also looking for a reputable company to carry out the repair, ultrasonic cleaning and testing? Thanks Dale

as per title *WANTED* R32 GTR fuel tank + pump + Braces must be plastic, as neex to get rid of my rusty metal tank and swap it for a nice plastic tank but will need all the bits as heard its 90% direct fit.. anyone know of anyone breaking a r32 except markturbo ;) many thanks cannon...

Hi, up for grabs I have a set of 4 injectors Siemens deka 830cc top feed injectors high impedance, there brand new unused, They have the common bosh type plug. Any takers!!! want them gone 250 GBP shipped.

Right, iv got a problem thats lasted for a few days, and its driving me crazy. i replaced the engine in my s13 200sx as the old one was screwed. everything has gone in right, all earths are connected right and all fuses are ok. i had the battery removed when i changed the engine obviously...

Hi, I'm looking to swap my staggered 18" Fuel Style 6 alloy wheels for a set of 18" Rota GTRs in white in the next couple of weeks. I haven't got close-up current pics of the Fuel's at the moment but they are in superb condition (1 year old) with the tiniest amount of curbing (not really...