help

Hi There! Pretty new to drifting here, still learning theories and have yet to put them into practice, but I wanna know if it's possible with what I have. Right now I drive a 2013 Nissan Versa (I know it's not great for drifting), FWD, 1.5L i4 engine, 102 in. wheelbase (259 cm), 2,441 lbs (1107...

hi everyone, recently ive picked up an E46 330d with a ridiculous map on it with hardcut flames and a boatload of torque. Only problem with this is that when i clutch kick it it breaks a driveshaft EVERY time due to the torque and im tired of buying and putting new ones in every other day. Would...

Hello, I am new to Driftworks, and have had an idea for a while now, about modifying my '95 GMC Sierra 1500 Sport Edition short bed, sidestep box, extended cab truck into drift truck, mine is quite beat up at the moment, the usual rust on the body that trucks that age usually have and all; But...

Hello. Does anyone know if a 300zx fuel pump hanger/cradle would fit on a 200sx? Can't seem to find any decent s13 ones for sale

Have a stock E36 M3 that I drift sometimes. Stock LSD, even though it is in good shape does not lock up the car enough to where sliding feels consistent. I don’t hit the track or nothing but used to manji a lot in my old Corvette C5. Pozzi on that car locked up for me enough to where I was...

Hi guys, looking for some help and any ideas possible. The driveshaft on my E46 drift ace snapped the other day but it has snapped the spline end that goes into the diff. I’ve managed to get the drive shaft out but the spline is still stuck in the diff due to the clip that holds it in. Tried...

i have an s13 with an rb25 an an r33 subframe. my problem is that the engine sits too high with oem engine mounts. i have found shorter mounts but these puts the engine more back and i dont know if it will fit with the head drain kit i have on the engine. is there anyone that have the same swap...

Hi Im a newbie in the car world and I would really like to build an 86 but with my budget the only feasible option is to buy a jdm engine/tranny and put it into an american body. Are there any major issues with doing this? And are there any legal issues?

Hi I’m just looking for some help I installed my chase bay hydro onto dual caliper (brembos 4 piston) a few days ago and it has pressure on the Handle and locks when the tires are in the air but once I’m in motion driving around it doesn’t I tried to initiate a drift it doesn’t lock it keeps on...

Hi I’m just looking for some help I installed my chase bay hydro onto dual caliper (brembos 4 piston) a few days ago and it has pressure on the Handle and locks when the tires are in the air but once I’m in motion driving around it doesn’t I tried to initiate a drift it doesn’t lock it keeps on...

Little history I had replaced the engine 2 times and also the turbo can't remember I'd I replaced the turbo before the last engine blew or if I fitted it to the new engine I come to replace the turbo again recently as it was leaking oil as I come to remove this small circle of metal fell out of...

Hey guys, new member here. This crazy intermittent problem is kicking my ass. I could really use some help. problem: After 20-30 mins of driving, the car will cut power, sometimes it’ll come right back, other times it’ll stall out like at a stop light and I cant get the car started right away...

Hello again, so i would need help or directions where to look for or for what in this project car. Basically its friends old project car, like old old, it was meant to be build back then but it didnt happen and now its mess. Its 240sx coupe body originally with A/T now stripped and KA is out...

So when I'm drifting on concrete, Ill try to start a drift by dropping the clutch, but the problem is, when I do this, my rear only skids and stops, I can never initiate a real slide. Does anyone have any advice?

Hi so I have taken my front cover off my SR20DET and found my oil squirter in my sump, now if Therse a way I can put it back in could someone tell me how Or if I need the mazworx one can I install that without stripping the bottom end down as that’s something I definately don’t want to do

Hi i need some help with wiring ut my rb25det to my ca18det s13. Is there someone that can help me?

I’ve got a fibreglass wing that I plan on putting on my mx5. It’s too wide to attach to the boot so I’ve come up with the idea of attaching it to some steel plates that I’ll just weld onto the boot. I need some advice on how to actually get it fixed onto the plates securely, using the holes that...

hi i have problems with my ca18det where i dont get spark on cylinder 3. plugs and coil are ok. but i cant get an conection with ignition 3 from ecu to coil plug. so i was wondering if someone know where the ignition 3 wire goes?

So I live in the upper Vancouver WA area and I used to scoot around in a 330i Auto BMW, practiced a lil bit of drifting but not super confident. Also own a 3rd Gen camaro with minimal drift time with it but it's getting old and it's been my project baby for autocross racing. But ive been...

Hi all! I have a set of Porsche Boxster S 986 Brembo brakes lying around and would like to fit them to my Silvia S15. Has anybody done this brake conversion before? If so any tips/parts you used? Any advice would be much appreciated! Cheers