hubs

Z32 5 stud hub set taken from an 89 Twin turbo auto, aluminium carriers, comes with handbrake cables and handbrake assembly including shoes which have plenty of meat on them. Have a full set of slim wheels nut that can be thrown in as part of the deal. £175 Collection from Warwickshire

This is a pair of modified front hubs done by Destroy Or Die. Look them up. Removed from my S13, give massive lock with supporting mods. Not been used, just been mocked up on car but breaking the car as circumstances have changed. I do have other modified parts for sale, check my other...

Just gone back to 4 stud so selling the 5 stud hubs I had on the car. I had to replace one of the wheel bearings in June and the other looked fairly new when I got the car. Rear bearings are all good as well. Ideal for someone who wants to go to 5 stud will only need arms! Pads on the rear...

Hi, Has anyone ever had this problem with HSD coilvers for an s14? The bolt holes on my new HSD's appear to be too small. The bolts which go through the hubs wont go through the Coilovers. The holes in the Coilovers are too small. Do I have to drill the mounting points or have I been supplied a...

Have an S14 front cradle complete with arms, steering rack and hubs for sale. Bushes and ball joints are good. Steering rack has no play or leaks. Bearing in the hubs are good. Pics on request, but it looks like a front cradle with hubs and arms :thumbs: £65 posted using Parcel Force...

Motec, Standard S14 parts, diffs, drive shafts, 5 stud hubs, Stack Gauges, Apexi Having a clear out. Open to offers on all parts. All parts plus postage or collection in Warwickshire or Liverpool. 3 Motec ultrasonic ride height sensors terminated with Autosport ASL connectors. Much...

I just wondered who knows the benefits for the rear Geomaster hubs, am I right they will lower your setup lining all your geometry bars to a stock position and increase grip? I think its the only thing that I dont have on my car now and wondered if its needed or not.

Right, Ideally i would like to get these split apart so i can paint up the knuckle before painting later.... Whats the best way? Press? Socket and hammer? Pullers? I have cracked off the four bolts in the back and its hard in the knuckle, so whats my next move?!? Stole pictures from...

Right, Just to clarify before i mess it up... Im halfway through a rear end restoration on the 14a. Have done the lower arms and subframe bushes. The hub knuckles are next, do i just burn bushes out and press new ones in or do i have to cut any sleeves out like on the subframe. Im pretty...

Ok so just started to rebuild my car as some may have seen already and i'm stripping the front end. I'm currently STUCK! The wheel speed sensor in the front knuckles will not come out for love nor money!! I've taken the bolt out, everything else is off and cleared out the way, and no...