hydro

Hey guys, so got a hydro and have some questions about how to run it. First off car is completely off road and used at track for drifts only, I’m still a beginner and have decided to get a hydro now after some practice. The car dose not have duel calipers as still to new for that. BMW E46 I...

Hi! I installed hydro to a -98 e36 328 and im having trouble to get the rear wheels to lock. Cylinder is 0.625 and its installed between master cylinder and abs pump. Brakes feel solid but handbrake does not lock the wheels and pulling the handbrake pushes brake pedal up and vice versa. Ive ran...

My stock handbrake is broken and I'm planning on mounting a hydro. Instead of fixing my stocks, I would rather just get a locking handbrake. The only ones I can see on the market are the BMP one. Since I have an e46 and am planning on mounting it below the center console ish, the V2 bracket...

Hi I’m just looking for some help I installed my chase bay hydro onto dual caliper (brembos 4 piston) a few days ago and it has pressure on the Handle and locks when the tires are in the air but once I’m in motion driving around it doesn’t I tried to initiate a drift it doesn’t lock it keeps on...

E36 compact. 2.8 from 528auto (clocks on 5 series read 78k ish when removed) Car mileage is also pretty low from memory but I'm not going to hitch jumper cables on it to find mileage rite now (it's pissing down.) Mounted to 1.8 box and diff now (diff open) Short throw notchy shifter (feels...

So I watched the RTR joining video that Adam LZ put out today. And one of the segments Chelsea Denofa was talking about how they use in-line hand brakes. Which got me really questioning my thought process over the years. Over my years of being around drifting and looking up stuff for how I want...

Hi, I’m new to this drift business... I currently have a car that only had a hydro hand break but the previous owner took out the old cable handbreak. I have an E46 325i 2000 BMW. How easy is this? Thanks!

1998 540i 150k. Wilwood .625" It doesn't lock up the rear 245/40/17 wheels at 20mph pulling the e-brake as hard as my skinny self can with abs off. Just slows down the car. I know for sure the lines are correct and bled the whole system with a vacuum bleeder. Pedal feels good. Ran a single...

Hey guys, my name is Pete, and I'm cursed with a goddamn r32 hydro. I've done my research, please don't be mad, I'm stuck and in need of proper help. First of all, here's the list of shit that I've done: * Dual Calipers (!) * Stock r32 n/a rear 1pot brakes with fresh pads * Wilwood .625 with...

I tried searching for something like this, but haven't found any info on it. Would this be possible? Single calipers in the rear, no dual calipers. Hydro e-brake with it's own master cylinder. Ditch the rear brakes from the foot brake all together. This way the foot brake will only control...

Hey! My name is Pol, I own a 99' e46 320i (almost about to die). I've been drifting for 4 months for now on, already got a set of coilovers, welded diff ofc and planing to mount a bucket seat the next month. So I am writing this because I am looking to install a hydro. I've been looking through...

hi all, Recently got a drift works knuckle duster hydro with 0.625 wilwood cylinder. I am using an s chassis dual caliper kit from villains in the US. It's a dual pot that sits on the s13/s14 standard size discs. Got it all in and plumbed a couple weekends back and worked solidly for a week no...

Unbranded new and never used 0.7 bar master cylinder looks very well made Located , Wolverhampton West Midlands price, £40 posted PayPal only , fees must be covered

I've crawled through all the post I could find on e39 hydro setup but cant find exactly what I'm looking for. At the moment I have the hydro installed inline with the existing brake system but I have two problems I want to try and resolve. Any help/advice would be great. 1. How do I...

For sale is my girlfriends much loved drift car, it has been a good car with no faults and is ready to go, it has all the mods needed: welded diff Compbrake hydro fitted at nispro Polybushed anti roll bars and uprated M3 top mounts Rack spacers Some airbags removed and others disconnected...

Hi all. Selling my RX8 as I'm getting deeper into my 13B turbo MX5 project and I already have enough rotaries to do me a lifetime. Here's a brief spec: Mazda RX8 231ps in PZ Brilliant Black 116k miles MOT'd til late December 2015 Engine, Transmission, Suspension, Performance: STARTS HOT...

New toy means that new parts are needed. Currently looking for a Hydro, vertical handle (.625 preferred, but please offer others aswell) and some adapters from 5x108 to 5x114.3 :thumbs:

Here's a link to anyone interested :) Hydraulic handbrake | eBay

so yea had a few rwd cars which included 3 Volvo 340s and a silvia which i swapped for something alot worse that we wont talk about... so this was the first one after this i faffed about in an E46 328 coupe which was shit. both my best mates had bought 13s so i had to out do them so i...

Been rooting at the womans car all day trying to find the best/shortest route to run her driftworks hydro lines. And no matter what way I try to run the front (input) line to the brake master cylinder it just won't reach, simply not long enough. The closest iv gotten to the cylinder is still a...