mazda

  1. S

    RX7 FD Shell - Rolling

    1993 Mazda Rx7 FD rolling shell Price is for rolling body shell, and the bare minimum suspension components (wishbones, oem coilovers) to make a rolling chassis. Also included are steering rack and front windscreen. Bonnet and boot lid are shown in the photos but not included in sale price...
  2. M

    £3500. Full Complete RX7 13b FD3s Engine! All Ancilliaries Included and Turbos. All sensors .etc.

    100% Complete RX7 FD3S Running Engine. Only 2k miles on Engine with receipt from HRE Rotary. I wanted to build a 700-800hp twin turbo V8 into my car so that is the route I have gone. Engine recently removed. It comes with all the parts. Turbos, ancilliaries, manfolds, sensors, and even the...
  3. N

    MAZDA RX7 FC RB25DET

    - Powered by RB25DET fully forged - Wosner pistons - ZRP con rods - ARP bolts - Innovative turbo - Tial external 44 - N1 Oil pump - Upgraded oil passes - Moroso accusump - ID 1000cc INJECTORS - Full Roll Cage - Sparco Bucket seat - Sparco harnesses - Brand new RRS extinguishing system - DTA S80...
  4. F

    231 Mazda RX8

    2006 Mazda RX8 231 The time has come to part ways with my RX8. It’s a 231 model and has been built over the last 4 years with around 20k put into it. Never skipped a beat, everything is healthy with recent compression test. Always serviced every 2k miles with 10w40 mineral oil and K&N filter. I...
  5. S

    Miata MX5 1.8 DOHC OEM Pistons

    I have 4 OEM MX5 piston sets laying around. Part code BPY2-11-SBX. Oversize +0.5mm. For BP DOHC 1.8l engines . 250e ono for all of them Worldwide shipping, located in Romania. *Image upload failed*
  6. Kyle Jones

    For Sale Drift/show NB mx5

    Unsure I wanna do this but a megane has come up for sale and in honesty, I want it. 1998 1.8 mx5 MK2/ NB Nbfl face-lift conversion Angel eye conversion hard top Sprayed in a metallic purple Destroy or die knuckles Ta technics coilovers 15x8 extreme offset wheels on the front Unsure in rear...
  7. W

    Mazda Rx7 Fc3s 13b turbo

    1991 Rx7 Fc3S Japanese import 13b turbo Fully rebuilt Still on run in mileage 12 month engine warranty Knight racing Coilovers Cusco brake stopper Fully poly bushed Lp2 midnight purple ( Few Blemishes) Kfd fuel defender 7twenty wheels Michelin tyres ps4 Bride ergo 1.5 Bride super low rail...
  8. tmb

    For Sale 1999 Mazda MX5 NB1

    Putting an ad on here before I post on Facebook or eBay. **CAR WILL NOT COME ON MEISTERS. SEE UPDATED PICS BELOW** Unfortunately the time has come to sell my UK spec NB MX5. I've recently bought a JZX and can't justify owning 3 cars, as well as it just sitting here and not getting any use...
  9. K

    Forged mk3 2.0 MX5 turbo

    Mazda Mx5 2006 mk3 Chassis on 86,300 miles, however this will rise as I'm still using the car occasionally Engine 2.0 mzr closed deck alloy block Forged H beam rods rated at 800hp Arp rod bolts Cylinders had a fresh hone New Nc2 fully floating pistons Fresh King bearings Fresh oem mazda...
  10. NicoCleanStyle

    For Sale Mazda B2500 RWD 2.5 Turbo Diesel Single Cab (SWAP FOR 350Z)

    Looking to swap for 350Z or IS200 Turbo. Cash price is £3300 Lowered on 4” blocks and torsion bars upfront. Has had professional chassis notch done by a shop. Brake lines have also been moved to avoid any contact with the chassis. Has also had custom short sump made and sump pickup shortened...
  11. NicoCleanStyle

    Wanted Pickup - Toyota Hilux/Mazda B2500/Mit L200/ etc

    I'm on the hunt for a RWD Turbo Diesel Minitruck/Pickup. Not dead set on any make or kind but would highly prefer a single cab. Condition doesn't matter at all, if anything I'd prefer a 'used' look. Toyota Hilux, Mazda B series, Mitsubishi L200, Ford Ranger or anything along these lines...
  12. Rideanddestroy

    For Sale Pair! Advan RG2

    For sale pair of Advan RG2 17” 9j +22. Original colour, like new. Located in Spain, 1050€ shipped to Europe.
  13. Rideanddestroy

    Wanted Advan RG2 18”

    Hi, I’m looking for two or four Advan RG2 18” 9J, 10J, et15, et22, et25. Thanks :D
  14. Mugenengineer

    SOLD Mazda MX-5 / Eunos Roadster S-Special 1.6 (low mileage & super clean)

    Here for sale is my gorgeous and pretty rare Eunos Roadster S-Special 1.6. From the general overall condition to the MOT history this example has been lovingly cared for and you can tell. I searched for ages before deciding on this example. Like all Eunos Roadsters the car is a Japanese...
  15. M

    FD RX7 440bhp (sold)

    After a sale or swap for something cheeper Price is £15k Swaps would be for cars half the value of mine or less, but I could push that for something a bit tasty Happy to send more pics and videos to anyone who is actually interested Has an mot till 2/7/20 MAZDA RX7 1.3 SINGLE TURBO 440...
  16. Sh00bs

    F20c swapped '85 Rx7

    lemme start with saying i've had about 16 first gens, 2 fc's and 2 fd's.... all dorito powered! this was my first Rx7 and after 3 rotaries in it, with all my other rx's im allowed 1 piston swap dammit! haha with that out of the way, this was about a 2 year project. im running an ap1 F20c from...
  17. J

    Mazda MX5 Mk2 1.6 turbo build

    Hi, I'm looking for some help with my mx5 turbo build. i have read around on the internet and i'm keen on running a Garrett 2560R. my end goal is around 250 WHP. i have though about a 1.8 swap with the same turbo. Also consider running a t28 however this is a lot more power than i'm looking...
  18. J

    For Sale Mx5 mk2.5 1.6 £1500

    Unfortunately it is time for me to sell my mx-5. The car had done 70150 miles. It has had its cambelts and waterpump done in the last 500miles. Along with the car having a TR lane rollcage and a Malian exhaust system on the car. The car also has the Mazda enkei wheels on with fairly new tyres...
  19. leegriffiths

    For Sale Rx8 231

    Cheap Rx8 for sale, never really been drifted apart from the odd car park and accidental roundabout! Car starts hot and cold no problem, this is the 231bhp version. Mileage around 53000 may increase slightly. MOT til 10th Feb 2020. Japan racing 18" alloys with sticky nankang ns2r tyres, can...
  20. D

    For Sale RE-Amemiya AW7 by Desmond 17x9 ET35 5x114,3

    Selling rare 3-piece forged wheels RE-Amemiya AW7 by Desmond, true JDM wheels ideal for Mazda RX-7! Dimensions 17x9 ET35 5x114,3. Recently coated in silver paint (centers/barrels) and polished (lips/bolts). Brand new nuts and RE-Amemiya resin stickers. Valve stems included, might need new seals...
Back
Top