oil

hi guys,after a long time I'm almost ready to start my engine, it has been resting in my bedroom for far too long, I would like to have a comparison, with someone who has had the opportunity to try different engine oils, different grades,the tolerances that were found during the reconstruction...

Hi Guys! What engine oil should I use for my E36 328i for drifting? Thanks!

Hi guys, I have struggled to find a rear sump at a decent price to convert my Aristo motor to fit in my E46. Does anyone have the complete sump for the swap, with oil pick up tube etc? Thanks

I rebuilt my sr20det with new pistons rings etc I'm 99% sure I offset the rings but it was a while ago that I put the engine back together, I didnt replace the valve stem seals as it didnt cross my mind at the time and the car has been without oil for around 6-7months, after my first few starts...

Hello, I've searched for an thread related to this but couldn't find any information. I have recently bought an Toyota Mark 2 with an single turbo 1JZ running with around 550 whp and 1kg of boost and i have been wondering if I should do a preventive rod bearing change. The engine is running with...

Hi please see my 3x greddy retro style gauges; Greddy EGT | OIL TEMPERATURE TEMP | OIL PRESSURE GAUGES - 52mm x3 Defi JDM https://www.ebay.co.uk/itm/Greddy-EGT-OIL-TEMPERATURE-TEMP-OIL-PRESSURE-GAUGES-52mm-x3-Defi-JDM/153652957112?hash=item23c66e0fb8:g:wcAAAOSw1EZdh1Mt Thanks :)

Hello people Recently my car has been driving like absolute crap and oil has been seen next to the turbo and looks like it’s leaking! Found a hole in my decat pipe and oil coming through it, will this be my problem?

Afternoon all. Got a JZZ30 Soarer (1JZ+R154) and I want to change gearbox and diff oil. Read several places that Redline MT90 is good stuff for the R154 but can find very little about the diff, AO2B on the vehicle plate in engine bay. I'm almost sure the diff's not standard as the inside wheel...

Hello Figure some of you will have a good answer to my oil question. Having a JZX90 Chaser with a stock BPU 1JZ-GTE non vvti 345whp R154 TRD 2 way diff I need to know what oil i need. Its a streetcar. I belive im going with Redline mt90 for my trans. but what do i need for the engine/diff? :D...

Hey Guys, I'm currently working on my RB25DET to get it ready to be installed in my 300zx Drift Car but i have a quick question. For my oil temp and pressure gauges, Glowshift gauges to be exact if anyone is wondering, is it best to have the sensor on the turbo feed line or on my oil filter...

Hi all, I am just wondering what at what temperature should the oil and water be at when idling and at what temperature are they over heating looked all around and can't find a straight answer on the internet. The setup I have is a standard red top SR20DET with standard fan and standard rad...

FOR SALE: obp 2ltr oil catch can 2L Ribbed Push Fittings Bulk Head Mount Oil Catch Tank OBPM02 Part Number OBPM02 2 Litre Ribbed Push Fittings Bulk Head Mount Oil Catch Tank Size: 205mm (H) x 145mm (W) x 80mm (D) 10mm Drain Bung, Sight Tube, 1/2" Inlet, Outlet & Breather. Its brand new...

Hi, What oil do you use in a 3.7 s14 Diff? Would 85w/140 be too thick? Should I use something like 80w/90? Thanks

Hi, I have just recently bought some second hand racing logic coil overs, I'm not sure for definite if they are leaking but there looked to be some oil around the dampener adjuster, is it likely that oil can leak from here? and if so how would I solve this issue? Any solutions would be massively...

Does my turbo have an oil restrictor in it?? (see pic) or will i need to buy one? Thanks.

Yo dudes, Got these that I removed from an Altezza I imported a year or so ago.. Was gona keep them for my own car when I eventually put it back together, however Iv got some PLX Gauges now so don't need these.. The set consists of: 3x Gauges.. Water Temp - Oil Temp - EGT(Exhaust Gas Temp)...

Just bought a standard low mileage (36'000) s14a and i'm not sure what oil to run the engine on. I haven't been able to find much information and my local garage doesn't seem to know either for some reason. If anyone could help that would be great. It's the SR20DET engine. Cheers.

I will keep this updated with new items. All prices are negotiable so all reasonable offers are welcome (better prices for multiple items if interested). Can post at your expense - happy to combine shipping. Should be around a fiver anywhere in UK (more for large/heavy items obviously). some...

Hi guys, After scouring the internet for hours i stil cannot find any answers to what im curious about. I got some bad A** VCT rattle and managed to get hold of a second hand sprocket after a few months of living with it. I fitted it last night and all is well but still plays up when oil...

Defi Oil Pressure with sender (black face lights up white) £85 Defi Oil Temp with sender (black face lights up white) £85 Will do the pair for £160 :thumbsup: Collection from Aylesbury or can post at buyers expense