tuning

- S14 Zenki ECU + Type 3 Nistune - 2x R35 MAF’s - 3” Intake pipe with bung welded on This setup is compatible with both CA18DET & SR20DET (S14 Zenki only) as they share the same ecu plug. Ran on my CA18 s13 due to the ecu being more responsive than the std ecu with a nistune. Standard being...

Hello! So I have 2 cars just sitting and since I like to DIY all the time, I thought maybe do a swap. Of course the build will be expensive and time consuming BUT. I'm here to ask advice from experienced builders. So the engine is 2.7TT from an Audi A6 C5 Allroad and the idea is to swap it to a...

Hi chaps, I'm looking at purchasing a link plugin ECU for the jzx100, would just like to know if anyone has had any experience running one, and if so how was the initial setup, what sensors are possible to run? (Ideally I'd like to go to MAP using the onboard 4bar, believe this also requires...

Can anyone recommend a good engine tuner in the north east? Have previously been to protuner which was great but have now relocated to newcastle. Any help appreciated. Cheers.

As the title says above, suspension and/or coilover tuning for the touge, which may very well be similar to auto cross. I do apologize for my lack of knowledge on this subject, and I do understand suspension and coilover setups are only the tip of the iceberg. Strut bars, a stickier tyre...

hello,I am looking for anyone who has a descent base map that would get my car running fine without broking up until i can get it to a tuner.I am running greedy emange ultimate for engine management atm.I am running 8psi,255walbro pump,returnline setup,adjustable fuel pressure regulator and...

For those using the AEMtuner software (Version 2 ems) here is a step by step of how to sync the Ignition timing. Syncing the ignition timing when using and AEM is a key step in the start up process. Using a timing light to check physical timing at the engine matches the timing value...

**update** For sale includes 1 year FREE indoor storage in Bangkok CCtv and i'll registration into your name (DO NOT NEED TO BE THAI RESIDENT OR ANYTHING to own a car 100%) I need to use the funds to finish my E30 and another V8 project. So i live in Bangkok and this is my daily D, trying...

So only that guys, I want to put an RB25DET on 4WD car. Can I? It will give me a lot of problems? Thanks!

Hi everyone, I got a saloon car. I want to wrap the hole car in vinyl, but I want to create my own design, basically I need someone to print everything for me and I will put it on the car myself. Does any one know any one or can advice me on the company? Thanks) SC300

Forsale, Pair of 1jzgte Turbo's These are off an engine I'm rebuilding, no longer needed as now single turbo. Iv not seen these running so sold as seen. There is virtually No play in the shafts, the impeller wheels all look to be good, and no evidence or any leaks internally or externally...

Hello, I have a Ca18det. I ran this motor in my Rx7 last year and she now lies in my s13. Any ways. It ran great last year (untill i wanted more power)... lol My current setup is -Blitz access ecu -safc2 -stock bottom end -300zx t3 turbo -Rx7 440cc injectors -Front mount -3" straight exaust -N60...

As the thread title says, I am considering having a dyno (AWD and capable of 1000+ hp) in the North Wales area, somewhere around Bangor/Anglesey and was wondering what the feedback may be. This will not ONLY be a dyno but I am most curious about what this particular aspect will mean for people.

Playing around practicing some launches, still need to lower the boost in 1st and 2nd but 3rd is ready for more :) updated pics. I figure this is the perfect forum for sharing my current project out here in Thailand ;) Check out the Blog for details and a little write up. Brewed Motors Flex...

Hello my friends, name is Eric i am currently living in the Bangkok area. Originally from Montana and lived in PHX for 5 years while working at Vivid Racing then Full Race. Looking forward to getting more involved in the Euro drift scene. my 2 cars in the states This one is for sliding...

Alright im still a bit young only 15 getting my liscense in two years. Loved drifting since i was a kid so thinking about following through with it. Im trying to find my first car yet, parents paying 50% for it. I know all the basics pretty much about types of cars and some simple tuning. Im...

Hello Everyone, I'm extremely pleased to say that this month FC Tuning has been accepted as a fully fledged trade partner of Driftworks. Over the last 3 years I have been working closely with some of the UK’s Top drivers, Drifters, Drift & Race Teams offering engine tuning solutions for a...