1992 toyota chaser drift car

cant afford to finish and run, i cant even afford tyres or get the wheels fixed to put tyres on. cant even afford to gas it up. if no one buys, itll just sit in my garage collecting dust. i dont realy want to sell, but have mortgage etc. and no point owning if i cant even drive it.
 
wish it wouldnt cost to much to ship dude...id have it in a second. goodluck with sale.

whats the spec like dude incase you break it??
 
ENGINE
1JZ-GTE from JZX90
CAT Turbo
Intercooler
Custom Exhaust Manifold
3" straight through exhaust
32mm Trust Wastegate, external vent
Electric Fan, hydro removed
Pod Filter
2.5" I/C piping
2x13B NA extra Injectors (not used)
2xBosch Fuel Pumps & Standard intake Pump
Custom Surge
Traction Control Removed
Trust Greddy Boost Cut Defender
Standard Ecu & 2x Standard BOV

DRIVETRAIN
W55 Gearbox with adaptor plate
Heavy Duty Pressure Plate & Standard friction disc
Locked 4.3 ratio

SUSPENSION
KONI adjustable shocks front & rear
Coilovers - 750lb front, 550lb rear springs
Custom rear sus top mounts
Front camber plates
Adjustable extended lower arms
Roll centre adjusters
Wide wheels spacers on rear

WHEELS
Merc style 17x9jj & 17x8jj(not for sale)
BBS Style 17x9jj
Keiichi Tsuchiya 17x8jj & 17x7jj
Tyres - 215/45/17

EXTERIOR
JZX90 modified Vertex kit sidestep & rear bumper
Facelift Tail Lights
Towbar for towing other Team members
Front bumper to come

INTERIOR
Modified Cressida handbrake, was auto
6 point rollcage
harness
Drivers Bucket

PERFORMANCE
Dyno: 236kW & 750Nm at rear wheels.
1/4 Mile: 14.0 @ XXXkm/hr
 
Last edited:
i could find out, i work for crown relocations. you heard of them? know where there branch is over there. cheaper to frieght crown yard to yard.
 
what bucket seat you got dude?? and is it base or side mounted??

intrested in the seat subframe and the wastegate to dude.plus the turbo and the exhaust manifold.

what diff is it?? its not any fancy is it dude??

yeah please get a cost on shipping bits dude i may well be intrested
 
the seat is a racepro which is side mount. i custom made a frame for the seat(fixed position).
the diff is the standard one which i welded up.
the exhaust manifold i also made.
the company i work for is expensive. but anything under 20kg i can post thru the postshop, so only like $100.
a 1jz front sump from nz to aussie is only $80.
 
you got any pics of the manifold dude??

could you give me a price with postage to uk on the seat frame,turbo,manifold and wastegate please dude??

i guess that both manifold and the wastegate only fit on the CAT turbo??

cheers dude
 
You must log in or register to reply here.
Back
Top