a Q about Rota Grid Drift fitment!

[Nicky_S14a]

hi, wee question!! im looking to get a set of Grid Drift for my 2000 S14a soon! id be looking for the biggest curve i can get on them!

could i run 18"x 9.5 all round in stock arches?

if not i was lookin at 8.5 front and 9.5 rear and the best ET could i run on it! and how much would they cost? An the same about 17"s aswell please!

Its lowered on apex springs atm, but will change to coilovers when i get the £ 2gether! I'll put stretched tyres on them too!

many thanks

nicky

 

[Clive]

9.5J ET20 would be best

depending on camber and tyre size will depend on if arch work is needed. a roll at most.

 

[kam]

Yep, I'd go 18x9.5J ET20 all round.

Roll on the back and you could run anything up to a 285 with the right geometry.

225/40 on the front and some camber, dependant on coilovers/tyre etc you might need a 5mm slip on spacer, nothing drastic.

Usual mods to the front arch/chassis rail if you have lock etc...

18 x 9.5 is £846 inc VAT with free shipping.
Drop me an email or call and we'll look at stock/colours