BMW E36 328i Decent Spec

JonspS13

Member
Hi guys,
I'm putting my E36 up for sale/part ex as I thought I'd be working now and can't really afford to keep it.
I bought it to learn to drift, but I ended up being too busy at uni to use it properly.
I know it's a very capable car as the previous owners put a lot of effort into getting it to how it is.
Perfect car to learn in.

1995 Non sunroof 328i saloon.

TA Technix Coilovers (Apparently a previous owner payed extra for stiffer shocks and springs.)
318i rear subframe and welded diff with 328i brake discs swapped over
Rear subframe front polybushes
Rear subframe rear polybushes
Rear trailing arm polybushes
Front anti rollbar polybushes
Front LCA eccentric polybushes
Horizontal hydraulic handbrake with the brake lines ran through the car
Suede steering wheel
Modified hubs
Rack spacers
Camber shims with longer bolts
2x reclining Corbeau bucket seats on E36 frames. Still capable of adjusting the seat forward and backward
Cheapo air filter
Metal impeller waterpump
Viscous fan delete
Thermostat delete
Electric fan which is insanely good at keeping the temps under control
17x8.5 et15 Mille Miglia MM11-2 with Nankang NS-2's that have done about 2 miles.
Golf tee mod.

I have a bunch of drift wheels and spare tyres. A spare radiator and passenger front wing.
The car has done 128k miles. It runs perfectly, sounds great and pulls like mad.

No tax or MOT
There is a bit of rust on the sills. I managed to get some spots down to bare metal and stuck some underseal on. I'm not sure what state the other patches are as I havnt got around to doing those. Theres a bit of rust on the rear arches where theyve been flared. A couple of bubbles on the front arches too.
There are a couple of dings here and there but nothing serious. Looks great when it's clean, but obviously not the prettiest thing as it is a drift car..

*It wont come with the M3 front bumper. The standard one will be fitted*

I'll be able to get more pictures soon as the cars not at my house at the mo.
If you have any questions, ask away.

I'm open to part ex offers. I'm considering an MX5. Just something that doesnt need any work to put on the road.

South Wales CF71

£1000


fvlgjk.jpg


1z5l0gh.jpg


e1562s.jpg


50qono.jpg


2hnmlnb.jpg


2mf14d2.jpg


15gxdzb.jpg


zl80t1.jpg


111t15v.jpg


34zamie.jpg
 
Last edited:
It's really dirty because it's on a farm at the moment. I'll have it back soon and will give it a proper wash.

Front left arch
2ah8kk7.jpg



Front right arch
2zrhqw2.jpg



Rear left arch
1tx7hz.jpg



Rear right arch
mceuxs.jpg



Right sill
mj7lds.jpg



Left sill
10pw0fs.jpg



Ding on the rear left
8zpao8.jpg
 
few more photos of the car in a clean state would be cool? also you say "Just something that doesnt need any work to put on the road.
" what needs to be done for it to be road legal or to make it pass mot any idea
 
A patch of welding will probably need to be done on the sill. The low beam headlights stopped working when I put new bulbs in (I'm completely useless with electronics, so I dont know whats wrong there). A cable hanbrake needs fitting (I have all the bits apart from one brake shoe adjuster).
I should be able to get it cleaned this week at some point.

2hnmlnb.jpg


2mf14d2.jpg


15gxdzb.jpg


zl80t1.jpg


111t15v.jpg


The bumper is off in the pictures because I was fitting the defuser.
 
Last edited:
I think i'm responsible for about half of the page views on this - my MX-5 is about 2.5k's worth, so i'm guessing not really what you're looking for...
 
I got a facelift e46 320d touring that's been resprayed now mint green if that would intrest you ? It needs an engine mount and a lower arm but drives and is legal
 
Back
Top