Driftworks Suspension Arms

[PhilMorrison]

We have massive huge ooober massive quantities of our new arms on the shelf now. They now use high load, high quality three peice Japanese bearings. These are the arms I finished the D1GB season in first place using . Don't confuse them with the low quality imitations .


Driftworks Camber Arms S13/R32/Z32
£150.00


Driftworks Camber Arms S14/S15/R33
£150.00

Driftworks Tension Rods S13,S14,S15
£120.00


Driftworks Toe rods S13,S14,S15
£120.00


Driftworks Traction Control Arm
£95.00

 

[NOS anyone?!]

do you do any of these for an r33?
and what bits are most important to buy first?
ive got the D2 drift coilovers but nothing else!

 

[MJG]

Puuuuurrrdy.

 

[Midgers]

do you do any of these for an r33?
and what bits are most important to buy first?
ive got the D2 drift coilovers but nothing else!

2nd ones down and the bottom ones
You can adjust the toe if you've still got the hicas control bars

 

[RandomGuy]

if i wanted to buy all of them, can you do a spethial price??

 

[PhilMorrison]

Also for R33


Driftworks Hicas Lock bar
£85.00

 

[PhilMorrison]

if i wanted to buy all of them, can you do a spethial price??

Certainly Can I'm just going to put a special offer in the shop..

 

[PhilMorrison]

Okay boys and girls, here's the rather special Four Arm Kit for S13 and S14



Driftworks S14 Four Arm Kit
£430.00










Driftworks S13 Four Arm Kit
£430.00

 

[Pikey]

That's over £50 off

 

[chris d]

good price, if i fitted all these arms who could send me a good set up to dial in. as there is no point fitting all that then running standard nissan settings.

 

[PhilMorrison]

I will tell you exactly what setup to align it too, believe me I have tried everything and can work out a setup for you, based on your other components, and level of skill

 

[Dori Mat]

only brought mine a few weeks ago wish i'd waited now

good deal for the 4 piece kit

 

[yeager]

using high load 3 piece bearings

Which to be honest is the most important bit with these things. The iron and welds are pretty much the same on any of these you'll see but the quality of the joints varies massively from farmers to race bearings From the pictures these look like the higher end joints...

 

[LilleGud]

Does annyone got a picture of theese mounted ?
And are theese all u need for both front and back ?

 

[shirunai]

yes these are all you need.

Rear

Front

 

[LilleGud]

Nice! thankyou. is that is fron a S13 right ?