steve_fctuning
ECU Tuner&Specialist
To my fellow Dutchman 
Just to let you all know ill be back over in Holland at the end of Feb
This tuning session will be taking place once again at DP Engineering, in Holland. The setup is excellent, They are well equipped & their cooling system is possibly one of the best in Europe, If not THE BEST ive seen out of the dyno's ive used in a loooooong time
So with that, combined with an excellent DynaPack Hub Dyno, you can be sure of excellent cooling simulation condition whilst Im engine mapping and NO SLIP at ALL being a Hub dyno (im also able to steady state tune properly BIG turbo setups using this type of dyno system)
DP-Engineering
St. Teunismolenweg 50 E
6534 AG
Nijmegen
The Netherlands
DP-engineering
For those of you based in Europe that don't know, whether your a Drifter, Drag Racer, Track Go-er, Street Driver - DP-Engineering is a company specialise in designing, fabricating and tuning complete turbocharger systems and associated products for predominantly mainly, Citroën and Peugeot engines.
'Dave and Pete' are top guys with whom im now good friends with. So naturally I choose to host my FCTuning European Sessions @ 'DP Engineering'
Now to all my Euro folk, newbies, this Session DOES fill up quick and already ive had 2/3 takers out of a maximum 4/5 cars that ill be proudly providing FCTuningNistune Solutions too as well as programming any other aftermarket ecu systems (named list to follow)
So if your seriously interested in getting your engine/ecu mapping properly set up on the dyno for the 2010 Season and achieving the maximum driveability from your car then please contact me
I'm also sure that Dave and Pete will also welcome any Power Runs too for people wanting to just check their fuelling and timing setups
Previous reviews on the 2 previous sessions can be read in my Testimonials Section (again, kindly posted by McClarenBoy)
I will also post a gallery link to pics & footage from Sessions 1 & 2 shortly.
Full Details in Dutch can be found here
FC Tuning komt naar Nijmegen (derde keer) - laatste weekend van februari
also here
Board Bericht
Special Thanks to DriftWorks Member 'McClarenBoy' for the translation (as my dutch is about as good my french - non existant
)
If you have any questions relating to this session then by all means PM me or post them on this thread
Cheers
Just to let you all know ill be back over in Holland at the end of Feb
This tuning session will be taking place once again at DP Engineering, in Holland. The setup is excellent, They are well equipped & their cooling system is possibly one of the best in Europe, If not THE BEST ive seen out of the dyno's ive used in a loooooong time
So with that, combined with an excellent DynaPack Hub Dyno, you can be sure of excellent cooling simulation condition whilst Im engine mapping and NO SLIP at ALL being a Hub dyno (im also able to steady state tune properly BIG turbo setups using this type of dyno system)
DP-Engineering
St. Teunismolenweg 50 E
6534 AG
Nijmegen
The Netherlands
DP-engineering
For those of you based in Europe that don't know, whether your a Drifter, Drag Racer, Track Go-er, Street Driver - DP-Engineering is a company specialise in designing, fabricating and tuning complete turbocharger systems and associated products for predominantly mainly, Citroën and Peugeot engines.
'Dave and Pete' are top guys with whom im now good friends with. So naturally I choose to host my FCTuning European Sessions @ 'DP Engineering'
Now to all my Euro folk, newbies, this Session DOES fill up quick and already ive had 2/3 takers out of a maximum 4/5 cars that ill be proudly providing FCTuningNistune Solutions too as well as programming any other aftermarket ecu systems (named list to follow)
So if your seriously interested in getting your engine/ecu mapping properly set up on the dyno for the 2010 Season and achieving the maximum driveability from your car then please contact me
I'm also sure that Dave and Pete will also welcome any Power Runs too for people wanting to just check their fuelling and timing setups
Previous reviews on the 2 previous sessions can be read in my Testimonials Section (again, kindly posted by McClarenBoy)
I will also post a gallery link to pics & footage from Sessions 1 & 2 shortly.
Full Details in Dutch can be found here
FC Tuning komt naar Nijmegen (derde keer) - laatste weekend van februari
also here
Board Bericht
Special Thanks to DriftWorks Member 'McClarenBoy' for the translation (as my dutch is about as good my french - non existant
)If you have any questions relating to this session then by all means PM me or post them on this thread
Cheers
Last edited:
- anyway can you send me a PM with a ballpark figure for mapping my AE86 running on MegaSquirt II Extra (Megatune or TunerStudio)?