For Sale: Brian James, twin axle, tilt bed trailer

[M@r]{]

Comes with custom built removable tyre/wheel rack capable of holding x8 wheels/tyres. Just had brand new tyres alround, completely rewired with updated LED rear lights, brakes recently serviced. Mudguard customised to allow removal to aid getting in and out of a low car. I will also include a used just once 12v whinch (with manual option) that very quickly clips on and off a custom whinch tower.

One bad bit is the hydraulic damper seems to have lost its strength, probably just needs refilling with fluid? The bed still works fully, just won't hold in place. Its never bothered me as I always load the car with ramps/scaffold planks so the weight of the car on the planks forces the bed to tilt anyway. Oh and there is a clip missing a part at the front, if you're bothered you could get it from Brian James for not a lot of money.

I'll get pics as soon as poss (ie when it stops chucking it down and its daylight) but its a trailer, you know what they look like!

Edit: price drop to £1400

Collection from NG33 or possibly deliver for monies

Any questions fire away

 

[IIvIIitch]

Length, width and weight it'll carry please

 

[M@r]{]

Length, width and weight it'll carry please

Good question, where do I find that out from?

As a guide I could easily fit my wide arched RX7 on it. And there was plenty of room at the back.

 

[J_K_P]

The weight will be on a plate near the tow hitch.

 

[M@r]{]

Ok thanks for that. I'll have a look when I get back later and post it up

 

[TurboAL]

Could you get those pics up

 

[M@r]{]

Could you get those pics up

Ok will do, but its a bit tricky as the trailer is in a barn. I'll get them as soon as poss.

In the mean time I'll describe it - its a flat thing with 4 wheels on it

Here is a picture of the same one I think (obviously mine is a little bit dirtier and used!)

Redirect Notice

And definitely looks just like this
http://www.google.co.uk/imgres?q=br...16&tbnw=193&ndsp=35&ved=1t:429,r:10,s:99,i:26

 

[M@r]{]

Just some more info; Bed width is 6'3. As I said I used to trailer my wide arched FD on this with room to spare (no need to remove wide wheels or anything)

 

[TurboAL]

Whats your reason for selling it?

 

[TurboAL]

What happened to those pic's?

 

[M@r]{]

Sorry for the delay. I lent the trailer out so just waiting for it to come back so I can take some pictures (should be this evening)

As for the reason for sale, I'm breaking my Drift Car so no need for a trailer anymore. I've reduced the price by £100 too as I've enjoyed the extra space in my barn so would like it gone sooner

 

[Sam_wkd]

Picture and bed length please

 

[mikeyce30]

as above pictures please as have cash waiting for a trailer

 

[Gogzy]

I had the exact same trailer, good trailers. Bed is probably 14ft long

 

[M@r]{]

Couple of pictures Bear with me they are just phone pics. The trailer is currently in Aylesbury so if that is more convenient for someone to look and buy make sure you let me know before it comes back up here (NG33) sometime next week.

Note, the tyre rack is not fitted in these (it comes on and off relatively easily)

Bed length I'll have to measure it when its back here. Its width is 6'3 To give an idea of length when the FD was loaded I had enough room to strap some tyres on the bed at the back! So plenty room for most cars I'm sure. I really doubt the length is going to be an issue.