Fuel Injector Flow Matching?!?

[Jackula]

Alright guys
I’m doing a 145mm pulley upgrade on M62 IS200 supercharger
I’ve got everything I need bar the injectors.
I’ve found a set of 4 1ZZFE flow matches injectors and another two from other sellers.
Where can I get these 6 injectors flow matched?
Or can I just walk them in and crack on?
Got the pulley, belt and Patriks box this is the last bit of the puzzle to get it running again.
Any help appreciated

Cheers, Jack

 

[r3k1355]

Quite a few places will do cleaning and flow benching, if the injectors are stock then they should all flow roughly the same after a clean and filter change.

BLiNK Motorsport

Scholar Engines

 

[Jackula]

Quite a few places will do cleaning and flow benching, if the injectors are stock then they should all flow roughly the same after a clean and filter change.

BLiNK Motorsport

Scholar Engines

Thanks for quick reply. So as long as I can get 6 OEM injectors, just send them off for cleaning and all should be kosher?

Thanks again

 

[r3k1355]

Yep as long as they're not damaged or anything (which is pretty rare TBH) they should all be fine, make sure you ask for the flow results once it's done - just for piece of mind that they're all ok.

 

[Jackula]

Yep as long as they're not damaged or anything (which is pretty rare TBH) they should all be fine, make sure you ask for the flow results once it's done - just for piece of mind that they're all ok.

Okay will do.
Thanks a lot mate, much appreciated!

 

[Justin AUS]

Send Them to AUS Injection if you still have them, located in az but they ship worldwide. message me