got my stuff

cefiro_drifta

cefiro_drifta

Mad pointing Munky
thanks melissa , got my stuff today but it came to my house address instead of my work address so not sure if u got the change when i did it online ???

no drama's as someone was home so it was all good

thanks for the wham :D
 
also can u stick the rad cap money backl on my card pls ... no point waiting for it as i dont need it

thanks Melissa
 
small lil other issue, i didnt get any instructions with the manual boost controller and have no idea which round its ment to do ... can u email em some or send some out for me pls :D

when u got time and stuff
 
cefiro_drifta said:
small lil other issue, i didnt get any instructions with the manual boost controller and have no idea which round its ment to do ... can u email em some or send some out for me pls :D

when u got time and stuff
Click to expand...

Best thing is to email sales@driftworks.com and Bon or one of the guys will help you out :)

We haven't had instructions for the boost controller for a while so it needs updating at the moment :wack:
 
I'm pretty sure the boost source will be the nipple which is in line with the bolt. The actuator nipple will be the one perpendicular to it.
 
Andy_f said:
I'm pretty sure the boost source will be the nipple which is in line with the bolt. The actuator nipple will be the one perpendicular to it.
Click to expand...

yeah that makes alot of sence as the lil ball bearing is under the spring which the bolt pushes down , just didnt want to cock it up and have it free boosting haha... which would be fun as hell
 
and do i intall it with the screw wound all the way up or down ????


and just for safety reason as im installing this ... the pipe coming off the turbo is the boost source
 
There should be a pipe from the turbo to the actuator, or from a boost source to the actuator, just tap into/replace that pipe.

Install it with the screw wound out then wind it in in 1/4 turn increments, it's pretty sensitive so don't go just winding it in all the way :wack:
 
and the actuator is on the left hand side if u looking at the engine from the front of the car ???

i dont knwo wat one looks liek and julian junked a whole heep of shit that wasnt needed/would get replaced
 
The actuator is the thing bolted to the compressor of the turbo with a rod going to exhaust side that opens the wastegate.... with a hose coming off it.
 
You must log in or register to reply here.
Back
Top