shirunai Active Member May 20, 2008 #1 What kind of nipples(unions) is it on the brakecylinder 10mm x 1mm yes just like the nissan brake system?
What kind of nipples(unions) is it on the brakecylinder 10mm x 1mm yes just like the nissan brake system?
Bon Bon It'll be fine May 21, 2008 #2 On the cylinder itself the fittings are 3/8 and 7/16, hence why we supply them with braided lines, for easy fitting to Japanese cars.
On the cylinder itself the fittings are 3/8 and 7/16, hence why we supply them with braided lines, for easy fitting to Japanese cars.
L Laisu New Member Jul 18, 2008 #3 Hey, i have a problem with my hyd. handbrake. When i pull it, it just presses the brake flued to the main tank instead of rear calipers. What could be the problem?
Hey, i have a problem with my hyd. handbrake. When i pull it, it just presses the brake flued to the main tank instead of rear calipers. What could be the problem?
PhilMorrison Driftworks Owner Staff member Jul 18, 2008 #4 you have the lines the wrong way round. The inlet for the hydraulic handbrake is the one at the back of the cylinder.. Don't worry, we've all done it
you have the lines the wrong way round. The inlet for the hydraulic handbrake is the one at the back of the cylinder.. Don't worry, we've all done it
