JZ Side Feed Injectors ForSale - 440s & 540s - 1jz 2jz

D

dale_b

#DriftFactory
Yo dudes..

I got 3 sets of injectors recently.. A set of 440cc, 540cc & 680cc Sards..

The plan was to use the 440s while getting the 680s cleaned and tested.. I fitted the 440s as I knew they worked and started to map the car.. Due to the Wastegate having a 1.2bar spring in, the injectors couldn't supply enough fuel to cope.. So I took the risk and fitted the 680s.. Turns out they run ok and the car is mapped with them now.
So the 440s are forsale.

The 540s are 3sgte items, i have no history on these and they are completely untested. Cleaning and testing is highly recommended.

Info:

440cc from JDM Aristo High Impedance (Pink) £SOLD

540cc from 3SGTE Celica GT4 Low Impedance (Red) £SOLD

380cc from 1JZ Chaser/Soarer (Yellow) (no 'O'rings) £7.50 each / £5 each if buying more than 1..



(Thought I had pics on my phone, turns out I don't.. So pics will be up tomorrow)

Postage is £5 First Class Recorded, or £14 next day door to door courier.
Paypal fees are to be covered.


:thumbs:
 
Last edited:
These are the 440cc injectors..

FED32BA9-8F8A-4F2F-B60B-9F8F6993F263-3185-0000022A52168D97.jpg


E0BF0496-EA28-44DB-8642-49533D4C7D4E-3185-0000022A442A76B6.jpg


A4AACD5E-2138-47B7-8076-255C358BC9C1-3185-0000022A4B5F50F5.jpg
 
on a 6 cylinder at 3 bar fuel pressure they would be comfortable with 400. but that would be 90 percent duty cycle-ish
Dale did you get my pm about the 550's ?
 
Bump...

Generally you'll see a little over 400hp with the 440cc.
And yeah, you said you were going to get back to me once you'd check something?
 
440cc from JDM Aristo High Impedance (Pink) £225
540cc from 3SGTE Celica GT4 Low Impedance (Red) £100

Will these injectors fit the standard rail on a non VVTI 1JZ ?
 
Yes mate, both will fit, no modification required:thumbs:
It's literally a 20 min job to change injectors, just 6x 10mm bolts.
 
You must log in or register to reply here.
Back
Top