Jzx100 chaser wheel fitment

[Bluegroper]

Hey guys, I've been searching around and found most of the info I need execpt this small little bit.
I'm woundering if 18x9.5 et22 will fit within the stock front gaurds of a jzx100 chaser, I'm guessing I'll need to roll the fenders to fit wheels. (don't care if the bottom of the rim pokes out, just care about the top being flush or within)

Cheers guys

 

[jay-young]

That should be ok, just be aware of tyre choice.

Mine Works were sold to me as 9.5 et25 but I don't think they are 9.5s... This is a square setup with a 235 rear. I'm now running 215 up front & 225 rear.

 

[Bluegroper]

That should be ok, just be aware of tyre choice.

Mine Works were sold to me as 9.5 et25 but I don't think they are 9.5s... This is a square setup with a 235 rear. I'm now running 215 up front & 225 rear.
View attachment 296013 View attachment 296014

Thanks for the photos man, helps me out a lot

 

[Dirk Jan]

Hey man, these are 18x9,5 +20 Work Kiwami's with 225/40 rears and 225/35 fronts, both Nankang NS2's. The fronts are really stretched with the 35's so I wouldn't trust them with spirited driving but I'm probably a pussy.

 

[Tripp]

If a chaser's arch liner is similar to an Altezza's, if there is rubbing you should be able to push it back with a heat gun