jzx100 diff

B

brian383

Active Member
Is there any other rear diff that fit a jzx100 ie altezza,hilux,haice any help would be great cheers brian
Im looking at different ratios
 
The crown wheel and pinion from a ma70 supra is 4.3 and they fit in the casing ..

I think it's the 3L n/a model that the 4.3 is in
 
Your better to check your axle code on the vin plate before you go buying shit.
Supra and altezza diffs are different sizes (Altezza it a 7.5" / supra 8" ) its the second to last 4 digits and starts with an F. For example mines F303, as its a 7.5" ring size, A 8" ring first digit is G. Heres a link to desipher the code.

Celica-GTS.com - Differential Codes


And if you go by the KAAZ diff codes the altezza and chasers are totally different.
KAAZ USA | Limited Slip Differential-Toyota
So if i'm not mistaken you've got an 8" diff chap:thumbs:
 
f010 then ?

DSC_0927.jpg
 
hmmm, looks to me more like B01B which would be a 145mm crown with a 3.30 r&p But, the last number doesnt stack up against the chart
so, going by the kaaz chart your car would be a sat/dat 3035 diff which is the same as mk3 supra's and 81's/91's ect
IE, An 8" diff. I'm just wondering if your model has the torque sensing diff due to the weird axle code? Tbh, i'm quite confused by yours,but this links usually pretty good for decoding it all.

Decoding Your Toyota VIN - Toyota Nation Forum : Toyota Car and Truck Forums
 
Last edited:
lol its a pain in the ass ill pull it out on monday morn and see whats inside as it had a lsd fitted to it i think it was from a mk3 turbo supra just want a 4.3 for it
 
this what i found dont seem right though
B01A 3.42 2 pinion open 7.5" ring gear
B01B 3.42 4 pinion open 8" ring gear
B01C 3.42 2 pinion posi (OEM limited slip)
 
Last edited:
Hello Friends, I have is200 Automatic Transmission, with 3sge engine, but need to Swap to 1jzgte, I have other Gx110 MarkII 1jzge with the Diff B01C and the diff for is200 is A01B,

I real need your help and advise if the diff of mark2 can feet on my Altezza
 
Hi lads new to the forum. I have a jzx100 mkII 99. And my diff is knackered I don't really know to much about them but I have it out of the car now and as far as I can tell all bearings are crunchy and gears look worn. What is my diff and what alternatives are there? Will the altezza fit in my casing?

DSC_0333.JPG


DSC_0193.JPG


DSC_0196.JPG
 
Martymk2 said:
Hi lads new to the forum. I have a jzx100 mkII 99. And my diff is knackered I don't really know to much about them but I have it out of the car now and as far as I can tell all bearings are crunchy and gears look worn. What is my diff and what alternatives are there? Will the altezza fit in my casing?

View attachment 319761

View attachment 319762

View attachment 319763
Click to expand...

Well man new to this now myself and was wondering if you figured out your question? I know its a couple years ago now but just chanceing it
 
You must log in or register to reply here.
Back
Top