"lalalalalalala - 330hp (14a)"

EgMassey

EgMassey

Member
Drift ready 14a

Drift ready
1999 S14a 200sx with lots of UPGRADED parts!

location Epsom, Surrey
Reason for sale in gueniune im going traveling in 6months so its time to sell up!
If sold before 17th of march will come with a drift what you bring ticket for Santa Pod
If the car is not sold by then i will be going my self :-)
Im in no rush to sell the car so serious buyers only please and no part ex!
contact me via phone or pm
07814941928

Thanks for looking
Dan


Apex 3" stainless steel exhaust including decat
Horsham developments Custom Remap!
GIZMO electronic boost controller
Tre-341 255lph fuel pump
ACT 6 PUCK competition clutch rated to 450bhp- 700miles old as the Exedy wasn't strong enough (rated at 300bhp)
Ultralight flywheel
NEW turbo manifold gaskets fitted same time as the clutch, the turbo was stripped down and rebuilt by Gav at DriftBitz
HKS suction induction kit
APEX front mount inter cooler
APEX short shifter
Driftworks Drift Button for Quick release handbrake!
Welded Diff
Iridium heat range 7 plugs (needed for higher boost)
15/50 fully synthetic Mobil 1 oil
Customer painted rocker cover
Chrome manifold/fuse covers
Gas bonnet struts
Green stuff rear pads

*New Parts*
32 Adjustable setting HSD coilovers (witch go super low!)
With Adjustable camber settings
Super wide Banded Steels!
*SUPER LOW OFFSET*
17" x 9 205/40/17 (front) 5 and 6mm (ET 6)
17" x 9.5 225/45/17 (rear) 3 and 5 mm (ET 0)


These are not fitted but will come included with the sale but these are advertised else where so price of car may change accordingly!

Yellow stuff pads for the front
Driftworks rear camber arms
Driftworks Braided clutch line

Bad points
small dent in the rear quarter seen below
very small amount of vvt rattle only on start up (very common on this engine)

20120308_124321.jpg


here are the pics if you have any questions please ask!

20120308_124253.jpg


20120308_124302.jpg


20120308_124339.jpg


20120308_124345-1.jpg


20120308_124402.jpg


20120308_124419.jpg


20120308_123445.jpg


20120308_123435.jpg


20120308_123424.jpg


[img=http://img543.imageshack.us/img543/8773/20120308124253.th.jpg]
[img=http://img600.imageshack.us/img600/5150/20120308124345.th.jpg]
[img=http://img822.imageshack.us/img822/5009/20120308124402.th.jpg]
[img=http://img850.imageshack.us/img850/8340/20120308124339.th.jpg]
[img=http://img535.imageshack.us/img535/3079/20120308123102.th.jpg]
[img=http://img826.imageshack.us/img826/5226/20120308123222.th.jpg]
[img=http://img217.imageshack.us/img217/1093/20120308123316.th.jpg]
[img=http://img526.imageshack.us/img526/2539/20120308123355.th.jpg]
[img=http://img41.imageshack.us/img41/3905/20120308123424.th.jpg]
[img=http://img826.imageshack.us/img826/4598/20120308124321.th.jpg]
[img=http://img4.imageshack.us/img4/1415/20120308123255.th.jpg]




Price £3950 Open to offers
 
Last edited:
steelies are easy to get banded .. just look on ebay. iirc they are around £60 a wheel.. so just looks for some 16 or 17" steels and just send em of.. and have epic wheels returned. My mate had a full set done for £180.

cool car. swap for my merc? :D
 
Steelies are off a Dodge Calibre - good luck finding them though! They're 1 of maybe 2 cars out there that have 17" steels in 5x114.3 - MEGA hard to find. If you'd not guessed, they came from me :p I ran them on my FC for ages.

Glad to see they fit well though, GLWTS mate!
 
You must log in or register to reply here.
Back
Top