Mr2 Turbo

The Big Yin

Active Member
POSTED ON BEHALF OF MY LITTLE COUSIN
anyone want to drift an MR2? anyone got the balls for it
Car is located in Central Scotland

well it kills me to do this but my pride and joy has to go up for sale due to rather unfortunate events :upset: .

i've owned the car for 2 years, and its never put a foot wrong runs flawlessly. now for the basic info on the car:

1994 Rev 3 mr2 turbo
M registered, 1 jap owner and im the 1st UK owner
car had 36,474 miles on it when imported, now has 39,600 miles on it all of which have been dry weather miles.
car has just had oil changed (silkolene pros 10w-50), new coolant (toyota red), new plugs and leads.
new beake pads front and rear 200 miles ago.
car currently is off the road for winter so no tax but will tax before sale
Mot'd until april
the car is in immaculate condition inside and out, see pics + Huge spec below

DSC_0034.jpg

DSC_0050.jpg

DSC_0048-vi.jpg

DSC_0046-vi.jpg

DSC_0003-vi.jpg

100_1926.jpg

100_1927.jpg


now enough of the pics heres the spec:

Engine, Head + Block
Eagle Con Rods
TTE grp A crank
TRD main bearings + Con rod bearings
Ported + Polished head
Exhaust manifold + head port matched
Ferrea 1mm Oversized intake + Exhaust Valves
HKS double valve springs
HKS 87mm pistons 8.5:1 comp ratio (overbores block to 2043cc)
HKS 1.6mm steel HG (Lowers comp ratio to 8.1:1)
HKS 272 cams (IN + EX)
HKS cam gears
ARP head studs
ARP flywheel bolts
ARP conrod bolts
Jun Lightweight Flywheel

Fueling
850cc side feed injectors
SARD fuel rail
SARD 1:1 rising rate FPR
EARLS fuel lines (tank to rail)
WALBRO 044 main pump
Bosch in tank lifter pump

Turbo + Exhaust
Ported exhaust manifold
Blitz K3 turbo
Custom downpipe
Apexi N1 spec exhaust system
Custom Induction kit

Cooling
Under trunk mounted triple row intercooler
Custom IC piping
13 row phoenix power oil cooler

Electronics (ECU etc)
Apexi power FC pro (additional features such as launch control etc)
Apexi power FC boost controller
Apexi rev speed meter
GREDDY boost gauge
GREDDY oil temp gauge
Blitz turbo timer

Suspension
Apexi N1 circuit spec coilovers
Cusco Camber adjustable top mounts (front)
Cusco strut braces front + rear
ARC 24mm ARB’s
REV 2 tie rods (castor adjustable)

Transmission
Cusco triple plate clutch
Zero sports short shift kit
Rebuilt + strengthened gearbox

Exterior
Arc twin GT rear wing
KEI office front bumper
KEI office side skirts

Wheels + Brakes
BBS LM’s 17 x 7 front, 17 x 9 rear
Cusco brake master cylinder stopper
Phoenix power brake pads

As said previously its breaking my heart to have to sell it but it cant be avoided.

looking for £7500 o.v.n.o

contact me via email me at scotia_mr2t@hotmail.co.uk, from there i will give out my phone number.

cheers for looking scott
 

Attachments

  • DSC_0034.jpg
    DSC_0034.jpg
    86.9 KB · Views: 0
  • DSC_0050.jpg
    DSC_0050.jpg
    93.4 KB · Views: 0
  • DSC_0048-vi.jpg
    DSC_0048-vi.jpg
    28.6 KB · Views: 0
  • DSC_0046-vi.jpg
    DSC_0046-vi.jpg
    27 KB · Views: 0
  • DSC_0003-vi.jpg
    DSC_0003-vi.jpg
    36.1 KB · Views: 0
bump bump,

surely theres somone out there who wants to buy this!

sensible offers will be accepted as car really needs to go :cry:

oh and its my car im andy's cousin
 
Back
Top