Nissan Skyline GTST R33

Jay786

New Member
IMG_5782.jpeg
IMG_5780.jpeg
IMG_4695.jpeg
55456.jpeg
54540.jpeg
45839.jpeg
45984.jpeg
45989.jpeg
IMG_0261.png
IMG_0262.png
IMG_0264.png
IMG_0265.png

RB25DET Big Single Turbo 1.2Bar Boost 600BHP

Bells Auto Service Built & RotorTorque Mapped.

Fully Forged Engine
CP Pistons
Manley H Beam Rods
Tomei Pon Cams 264 Type B
Block Bored & Machined
Port & Polished Head
Bosch 1000cc Injectors
Cosworth 1.5mm Gasket
N1 Oil Pump
Extended Crank Collar
Custom Oil Cooler
Uprated Gaskets
Billet RB Rebuild Front Facing Intake
LINK G4 ECU

Pulsar GTX3076R T51R Mod
6BOOST Top Mount Manifold
Turbosmart 45mm Hypergate with external screamer pipe
HKS HiPower Exhaust
Heat Wrapped Custom Downpipe
Big K&N Air Filter

MeisterR ZetaCRD Coilovers Fronts
Tegiwa Coilover Socks
Whiteline Anti-Roll Bar Set
Driftworks HICAS Removal Kit
Driftworks Front Camber Arms
Driftworks Front Tension Rods
Driftworks Front Lower Control Arms
Driftworks Rear Lower Control Arms
Driftworks Rear Traction Arms
Driftworks Rear Camber Arms


Mileage - Body 127K/Engine 800 Miles
Full Matte Respray By Previous Owner
Welding and rust repairs carried out on front end.
GTR Sideskirts, Rear Bumper & Spoiler
AAA Kit Front Bumper (Small Crack)
Lightweight Vented Wings
Clear R33 Tail lights
18'' Volk Racing CE28 Wheels
New Genuine Wheel Studs &
Nismo Gearbox Mount
Braided Lines
Walbro 450LPH Fuel Pump
Japspeed Radiator
TOD Alarm System With Key Fob
Pop/Bang/Flames Kit
Fuel AB Regulator
Hi-Cas Delete
Big Tank Fuel Filter
Momo Steering Wheel
R33 GTR Handbrake and Gearstick Covers

Bad Points!

Requires steering rack as inner arm bent when put onto recovery truck (I have one, just needs fitting)
Small tear on drivers seat
Underside requires some work, new sills needed and boot floor is rusted.

Looking for £22.5K ONO

PLEASE NO TIMEWASTERS OR TYRE KICKERS

IMG_0264.png
 
That Nissan Skyline GTST R33 with the RB25DET engine sounds like an absolute beast! With a big single turbo pushing 1.2 bar boost and a whopping 600 bhp, it must be a thrill to drive. The Bells Auto Service build and RotorTorque mapping ensure that it's not just powerful but also reliable and well-tuned.
The fully forged engine with CP Pistons, Manley H Beam Rods, and Tomei Pon Cams 264 Type B, along with the block bored and machined and the ported and polished head, all contribute to its impressive performance.
 
Back
Top