Norwegian Volvo 360 project

[EMyrdal]

Well, i'm new to Driftworks but i'm planning to make a drifter out of this daily driver!
It's a early 1986 model, 2.L K200i with stock specs.

Plans;
Slam the hell out of it, 3,5" all around.
Coilovers up front
maybe swap to the B20 with dual 45weber carbs and som goodies.

i'll start with pictures from when i first bought the car 4 months ago from a friend of my dad.

just your stock boring 360 saloon..
i bought som Atiwe 15x6,5" rims that i though was pretty cool!

and then winter suddenly kicked in here in Norway three weeks ago, so i had to put som radicules tires on them, but that, as the picture tells, didn't work out.....

so steelies for me!
the car ran on three cylinders and that wasn't good so i changed the distributorcap, the inside of the distributor, spark plug cables and spark plugs, just a picture of the old cables

then i god a hold on some parts yesterday and i thought; what the hell, i'll make it nice! so i decided to strip the front and prep the bumper and shit for paint, and wrapped the headlights in yellow tint!

The wrap looks like shit up close, i didn't quiet figure it out x)

More to come, stay tuned!

 

[Skippy_]

Welcome.

 

[EMyrdal]

Welcome.

Thanks Skyppy_ !
any thoughts on the project?

 

[Si-340t]

Welcome aboard, nice to see another Volvo

 

[Si-340t]

Another good source of info for the Volvo 300's is Volvo 300 Mania • Index page if you not already aware of it

 

[DK_Denmark]

Welcome, good luck with the project

 

[EMyrdal]

Thanks!

Thanks for the welcome everyone! yes, 300mania is regularly visited! thanks for the tip though! btw anyone know where i can get loweringsprings at the front?? and or lowringblocks for the back??

 

[Si-340t]

Thanks for the welcome everyone! yes, 300mania is regularly visited! thanks for the tip though! btw anyone know where i can get loweringsprings at the front?? and or lowringblocks for the back??

Check here
Volvo 300 Mania • View topic - Performance parts cat

 

[EMyrdal]

Thanks a lot mate! now i'm saving up for som bushings, dampers and lowering blocks!

 

[EMyrdal]

Done some work the last few days

So, i've startet to make the car look good, or.. gooood

I'm gonna grind off any paintwork on the hood
But then i looked at my poor fenders, and they looked shabby at best! so i decided to paint them black,

Finally done, it took seven hours of grinding!

Now, it's time to mask it of and lay down a layer of clear!

Now, i just used saltwater and waited!

Today i'm gonna mount the hood on the car, hopefully!