Mr Bizzle
In Safe Hands
RB25DET Powered Nissan Cefiro (ANY OFFERS CONSIDERED)
Im sorta half tempted to sell/swap it.
http://www.driftworks.com/forum/showthread.php?t=16952
She's a bloody good car, but i am getting pressure from all sides to buy a cheepo runabout instead of a skyline powered taxi for an everyday driver.
However, i may consider a swap with something else interesting so do let me know. W.H.Y.?
Im probably just being a mincer... But i will plonk it up here anyways and see what comes of it.
The Engine has been rebuilt with:
Wiseco Forged Piston Set
Tomei 256 cams (in/out)
New Big End Bearings
Genuine Nissan R33 Gasket Set
New Timing Belt
New Power Stearing Belt
New Oil Filter
New Fuel Filter
New Alternator belt
New Fan Belt
High Tensile ARP Manifold Studs
New Clutch release bearing
Cometic Steel Headgasket 1.5mm
New Exhaust Gasket
R32GTR Clutch
Walbro 255lph fuel pump
Chassis Has:
Welded Diff
Driftworks Polly Subframe bushes
R33 Skyline rear hubs
S14 front hubs
R33 Skyline Brakes All Round
Reddot Grooved Disks
EBC Pads
KYB Shocks with HKS Springs
Some SERIOUSLY rolled front and rear arches (Cheers for letting my use the arch roller phatty)
She also has an AVCR boost controller.
OFFERS! Anything! PM ME YOUR OFFERS!
EDIT
Also,
Thought i would add some of the engine build pics:
Engine Out of Donor R33. Low milage engine, only had 42,000kms on it
Sump off:
Wiseco Forged pistons in:
More:
1.5mm Cometic Head Gasket:
Head on with funky new Tomei 256 in/out pontecams fitted:
More:
Engine Ready to go back in car:
Rebuild List:
1x Wiseco Forged Piston Set
2x Tomei 256 cams (in/out)
12x Big End Bearings
1x Genuine Nissan R33 Gasket Set
1x Timing Belt
1x Power Stearing Belt
1x Oil Filter
1x Fuel Filter
1x Alternator belt
1x Fan Belt
12x High Tensile ARP Manifold Studs
1x Clutch release bearing
1x Cometic Steel Headgasket 1.5mm
1x RB25 Exhaust Gasket
Didn't do Oil or Water pump as they were pushing really good pressure and was a really low millage engine.
Im sorta half tempted to sell/swap it.
http://www.driftworks.com/forum/showthread.php?t=16952
She's a bloody good car, but i am getting pressure from all sides to buy a cheepo runabout instead of a skyline powered taxi for an everyday driver.
However, i may consider a swap with something else interesting so do let me know. W.H.Y.?
Im probably just being a mincer... But i will plonk it up here anyways and see what comes of it.
The Engine has been rebuilt with:
Wiseco Forged Piston Set
Tomei 256 cams (in/out)
New Big End Bearings
Genuine Nissan R33 Gasket Set
New Timing Belt
New Power Stearing Belt
New Oil Filter
New Fuel Filter
New Alternator belt
New Fan Belt
High Tensile ARP Manifold Studs
New Clutch release bearing
Cometic Steel Headgasket 1.5mm
New Exhaust Gasket
R32GTR Clutch
Walbro 255lph fuel pump
Chassis Has:
Welded Diff
Driftworks Polly Subframe bushes
R33 Skyline rear hubs
S14 front hubs
R33 Skyline Brakes All Round
Reddot Grooved Disks
EBC Pads
KYB Shocks with HKS Springs
Some SERIOUSLY rolled front and rear arches (Cheers for letting my use the arch roller phatty)
She also has an AVCR boost controller.
OFFERS! Anything! PM ME YOUR OFFERS!
EDIT
Also,
Thought i would add some of the engine build pics:
Engine Out of Donor R33. Low milage engine, only had 42,000kms on it
Sump off:
Wiseco Forged pistons in:
More:
1.5mm Cometic Head Gasket:
Head on with funky new Tomei 256 in/out pontecams fitted:
More:
Engine Ready to go back in car:
Rebuild List:
1x Wiseco Forged Piston Set
2x Tomei 256 cams (in/out)
12x Big End Bearings
1x Genuine Nissan R33 Gasket Set
1x Timing Belt
1x Power Stearing Belt
1x Oil Filter
1x Fuel Filter
1x Alternator belt
1x Fan Belt
12x High Tensile ARP Manifold Studs
1x Clutch release bearing
1x Cometic Steel Headgasket 1.5mm
1x RB25 Exhaust Gasket
Didn't do Oil or Water pump as they were pushing really good pressure and was a really low millage engine.
Last edited:
