rota grid

gweedo

gweedo

Member
I' m looking for a new set of 4 maybe 6 wheels, I really like them rota grid 16x8 et10, but I' m not sure if they' ll be okay on s14 calipers? now I have rota torque 17x9 et30 and use 5mm spacer in the front to clear them. also planning to use 315mm brackets to with m3 brake discs, they bring the caliper a little bit up maybe that' ll help to fit grids??

Thanks
 
They would be fine on S14 calipers and stock S14 discs, but I'm not confident with the M3 brake disc conversion as I know on an E36 M3 you need 17" front wheels minimum. The problem with the 17x9 torques is the offset and wheel design, the grid drifts being an ET10 don't have the same issue. :)

So yes on stock S14 brakes, and I doubt it with the M3 brake discs.
 
I' m asking because guys from the USA says it doesn't go on z32 calipers, and z32 and s14 calipers are the same. So I' m really confused:confused:
 
Hmm ok, S14 calipers usually have more clearance than Z32, they're not identical! I'll double check to be 110% sure!
 
Ok it seems that the 16x8 ET10 would require spacers to clear the brakes, although some people claim to be using them Rota trial fitted a Grid on an S14 and it hit the caliper. :(
 
Definately more than 5mm but we're not sure, I can't find any definate info on spacer size needed.
 
You must log in or register to reply here.
Back
Top