S13 / PS13 Modified Parts WITH PICS PART 1

R

Robert

Member
Parts list any questions or for payment details 07500 235 335 or send me a PM

Forged Redtop SR20DETengine built by Julian at Garage-D aprox 15k miles ago. £1900
*Forged Pistons*S15 Rods*ACL Bearings*ARP Studs*Garage-D Sump Spacer*Metallic Headgaske*Modified Oil Pickup*Driftworks Magnetic Sump Plug
RedTop SR20 engine loom £150
20151015_114016.jpg


Apexi PowerFC (no commander) £350
20151015_174426.jpg


Braided turbo lines £60
Custom one piece Downpipe and cat back exhaust system (sounds amazing and no leaks but a bit scraped due to lows) £175

Japspeed Stainless Manifold £130
20151012_133027.jpg


KOYO Alloy Radiator £150
20151013_162748.jpg


Japspeed Oil Filter Relocation kit with braided lines and HKS Oil Filter £125
MOCAL Oil Coooler with Braided lines £150
20151015_113404.jpg


Braided Clutch Line £20
20151015_171949.jpg


ORC 409 Billet Clutch - Needs rebuilt -£250
20151015_110940.jpg


Twin electric fans £40
20151012_170542.jpg


Revotec fan controller £50
20151012_133318.jpg


Custom Alloy Exhaust Heat Shield £20
20151012_170623.jpg


D1 Spec Oil Catch Can with Silicone hoses £40
20151012_111704.jpg


DEFI Gauges with senders and controller (oil temp, water temp, oil pressure, boost) £400
20151015_154713.jpg


Gizzmo Boost Controller £130
20151015_155239.jpg


Suede OMP Steering wheel with horn button £50
20151010_154909.jpg
 
Last edited:
I think it's for when the car has been tubbed and slammed to the ground stops them from popping out maybe but I ain't 100% on that
 
yes you're on the right track soggysock

Here is a more detailed explanation.

When lowering your S/R body you will often find excessive movement in your driveshafts between the diff and hubs, especially so if you are running between 0 and 1 degrees camber.

The problem is often further compounded when the car is fitted with subframe risers and/or drop knuckles (eg Driftworks Geomasters) as the resulting angle of the driveshaft causes considerable play. It is this play that can often cause premature CV boot failure; an issue nobody wants to deal with on the road or track.

By fitting these aluminium shaft spacers in between your driveshafts and the output flanges on your diff, play will be reduced to an absolute minimum, prolonging the life and improving the reliability of your driveshafts and CV boots.
 
You must log in or register to reply here.
Back
Top