Wanted wanted-ae86 bride egro subframes
- Thread starter tetsujin
- Start date
CorollaRWD
-RUTHLESS-
I sold some to kazumi-fujiwara a few months ago not sure if he sold them with his car or not
If not look at about 110 each over here new cheapest
Or over 200 for other places
Alex
If not look at about 110 each over here new cheapest
Or over 200 for other placesAlex
i had a pair of recaro seat (none bucket type) before and i used the seat rail off the oem seat and it did the job but it's quite difficult to fit. because 1 side of the rail is welded on. and the seat height is a bit too high.
if you gonna use is for drifting, i would suggest that you get a proper seat rail from CorollaRWD or some kind rather than bolt a piece of metal down and it may come loose when you drift.
if you gonna use is for drifting, i would suggest that you get a proper seat rail from CorollaRWD or some kind rather than bolt a piece of metal down and it may come loose when you drift.
20vWill
Active Member
tetsujin said:wanted-ae86 bride egro subframes
I need subframes to fit a ae86
The seats are the none bucket type that bolt into the botom of the seat.
If anyone has sum for sale or knows a decent place to get these or has any idea what I am talking bout then let me know.
Thanks
Adam
Measure the width and length of the bolt distances... I may be able to help and they'll be comparatively cheap.
20vWill
Active Member
tetsujin said:I take it you mean on my bride seat??
Also re the clutch, I was thinking of geting the Cusco one re plated with new friction pads at Helix??
Adam,
Yep, on the seat OBVIOUSLY
Re-line sounds like a good idea... should be under £100 that way. Cerrametallic is nice, but quite viscous.
I'd go for the re-line if I was you, since the OEM clutch kit was a bit more £££ than I expected it to be. They blame low volume sales (not too many GZE customers in the UK).