Wanted Wanted: T3 to T4 Adapter Plate/Flange (twin scroll)

[dale_b]

Yo dudes..

Im after an adapter plate to go from T3 to T4.. Preferably Twin Scroll(divided hole)...

What you got?

Thanks
Dale

 

[dale_b]

Bump...

 

[dale_b]

Bump.. Having trouble locating one of these.. Anyone know where I can get one from?? eBay has none..

 

[Clive]

eBay. Some one on there does custom flanges made to measure

 

[dale_b]

Yeah iv looked dude, and emailed the 2 people that make/list them up.. Had no response for 3-4 days from either. Think they might have been put off by the fact I want proper tapered holes..

 

[Clive]

I would sure weld it, not bolt it onto mani...


then just get the other holes drilled to suit a cutting tap... then tap them yourself.

 

[Polo]

Just get a T3 flange and weld it to the t4, no extra gaskets to worry about then.

 

[dale_b]

Yeah that's what I may end up doing.. Was always planning on welding it to the mani, just wanted the holes to taper from the t4 size to the t3 size, so the exhaust gas flow doesn't have a step as such...
Can't even find a t3 twin scroll flange to machine out myself though.. Might see if the CNC shop opposite me can make me the flange for a reasonable amount, one off things are always expensive though..

 

[dale_b]

Bump...

 

[Polo]

Just port the taper in with die grinder and carbide cutting bit.

 

[dale_b]

Yeah that's probilly what I'll end up doing, today my friend brought me a chud of steel plate 1/2" thick.. Wayy don't want to sit there for 2 weeks over Christmas grinding it out, but if I can't find anything soon that's what I'll do..

Is there any interest in proper weld on, tapered hole flanges? If so, I'll get a batch of 10 made at the CNC shop opposite me and knock um out?

 

[dale_b]

Bump like this...