too loud tom
Member
Hi people,
I have for sale my Dreg White Rx7 (near finished) Project
It has a Rover 3500 V8 engine fitted, 5 speed manual gearbox, running a High lift Kent cam, new Holley carb with a new edelbrock chrome pancake filter, modified exhaust system with 5" Jap spec rear box, 30mm Lowering springs. 17" TSW alloys, welded diff, battery has been relocated to behind the passenger seat.
The interior is tatty and needs tidying. Will probably need minor welding for its MOT. Bodywork is very sound and looks nice as can be seen in the pics, the only rough bit at the bottom of one front wing.
The final bits we didn't get round to finishing were the horn, and fan on the radiator needs wiring to a switch (rather than wires twisted together
).
And the reason for sale:
After welding the diff and fitting it on the morning of the cars first drift session, we trailered the car to the track and after 3 laps as i was starting to get used to the car, the clutch started slipping.
I needed a sorted drift car and with a bit of money in my account i bought Steve Dunn's Soarer So the RX7 has been sat on the driveway untouched since the drift session, although the car started when i went out to look at it earlyer 
The car sounds great
. Buy it now before we rob the wheels off it to drift on .
£1000
I have for sale my Dreg White Rx7 (near finished) Project
It has a Rover 3500 V8 engine fitted, 5 speed manual gearbox, running a High lift Kent cam, new Holley carb with a new edelbrock chrome pancake filter, modified exhaust system with 5" Jap spec rear box, 30mm Lowering springs. 17" TSW alloys, welded diff, battery has been relocated to behind the passenger seat.
The interior is tatty and needs tidying. Will probably need minor welding for its MOT. Bodywork is very sound and looks nice as can be seen in the pics, the only rough bit at the bottom of one front wing.
The final bits we didn't get round to finishing were the horn, and fan on the radiator needs wiring to a switch (rather than wires twisted together
).And the reason for sale:
After welding the diff and fitting it on the morning of the cars first drift session, we trailered the car to the track and after 3 laps as i was starting to get used to the car, the clutch started slipping.
I needed a sorted drift car and with a bit of money in my account i bought Steve Dunn's Soarer
So the RX7 has been sat on the driveway untouched since the drift session, although the car started when i went out to look at it earlyer The car sounds great
. Buy it now before we rob the wheels off it to drift on .£1000
Last edited:
