diff

Hi, i fitted a brand new Cusco RS 1.5 way LSD. Now i have a clunk noise on decelaration in corners. No noise on straights. Today i refurbished the axle shafts (just new grease, the cv joints were fine) and it's less noisy now. I made a video of the differential side flange. Can anybody tell...

Needing a 4:1 skyline diff Will be at bdc on sat if anyone had one Thanks

I have been on a lookout for a 4.363 final drive ring and pinion for a while now. All I could find were very good options from Japan, but with casing and Nismo/Kaaz 2 way LSD. That would be perfect if I didnt have both already. Other options were too expensive. Later I found a breakers yard...

Ta very much. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F273050235524 Chris.

Kaaz 2-Way LSD for S14. Still in original packaging including gasket etc, product serial code is SAN2745. Open to offers so drop me a message

Check this video out! :cool: I got plenty of other car videos on my channel if you like them consider Subscribing :nod:

Hi. Im sure this has been asked many times before but. Do coilovers, brakes, and diff from an ae86 fit on an 1980 ke70 sedan?

Complete rear end. Original 4 stud. Brakes. Shafts. Arms. Subframe. 383 LSD. What you see is what you get. Everything turns freely. £200 ono Located Colchester essex

For sale: BMW E36 Saloon/Coupe/Touring/Cabriolet welded 4.44 small case diff with medium case cups to run stronger shafts. Ran it daily for 3 months but changed ratios so no use for this now. Collection - Cambridge or Newmarket £80

Hi all as the title says ive got a welded R200 Diff for sale came off an S13. im after £300 or nearest offer. Thanks

Hi, I'm looking for a 4.1 or 4.3 Nissan r200 diff, ideally an abs with 6 bolt 200sx cups but would consider a skyline diff if you have 5 bolt shafts to go with it. Can be open/LSD as I will only be welding it up. Will need posting to Devon. Let me know what you have. Cheers

Hi all! Hope im posting in the correct place. So my question is this, I currently drive a Supra MK4 (410 whp) , weight down to 1280 KG ~ , wisefab all round, and using a 330d Gbox with a 4.1 Ratio Diff. A major issue i been having is that gearing have been closing very early on each gear, 4th...

Hi, Im looking for a 3.2 ratio small case (200mm) diff from a Lexus/Supra, preferably without LSD Using a 330d gearbox for drifting so need some seriously long diff gearing.. Thanks!

Hi guys, Hello from Croydon! This is my first post so just a quick hello and a picture of my car! I'm currently building my 36 to be a drift car. I've managed to pick up a cheap 320 and throw that engine in whilst I look for a 323 or 328. Current mods are: 320 engine conversion Uprated...

Hello all! I've been looking at driftworks for a while now and thought i'd post a question.. a few months ago i've bought a nearly finished diff off of a friend of mine who had made it into a lower ratio diff using the Kia Sportage diff. Now im trying to figure out how to finish it. But i've...

Looking for a mid case E36 LSD, one with the four bolt input flange (early M3 or 328is), what's about? Ideally as close to Gatwick as possible.

Hi, I'm after an s14 4.3:1 diff, would consider 4.1 but being NA i want as short as i can get. preferably a 1.5/2 way but would purchase a welded if needs be. I have missed these 3 in the last 4 days:- Kazz 2 way diff 4.1 in 14 case with skyline 5 bolt inputs £250 sold Skyline diff 4.3...

Hi so i've had this problem for a while now. ill list what i've tried, hoping someone with some knowledge might be able to help me out. So its mysterious klonks from the rear. I have a welded diff in there, when i start moving it klonks quite bad and when i turn, rather that one wheel skipping...

4.3 diff wanted for an s14. 6 bolt or 5 bolt. Whats out there? Thanks

Want to buy Supra/ Soarer Differential Highest Ratio Possible - Preferably with the following codes - Has to be OPEN Diff Code A02B Code A03B FYI - http://www.supraforums.com/forum/showthread.php?608545-JZA80-Differential-Info!