s13

Hi all, I've got a 1991 200sx which I bought as a rolling shell. I'm now in the process of putting in a CA18DET from another S13. I've got the engine in and I'm now trying to wire it up with the mess of wires I have. I'm missing quite a few bits which is making it quite difficult. I was...

Ongoing Project... Hence The More I Do The More The Price Goes Up. £5k as she sits today. Send A PM with Your Number if you are interested and I will Call You! Low owners, fairly clean Nissan Silvia S12 1.8L TURBO Manual. Lots Of Work And Maintenance done. Would benefit from some cosmetic...

I'm looking for a used fibre glass rear bumper for an s13 to roughly match the kit in the photo, I think the kit is a replica Vertex but not entirely sure. I don't mind a bit of damage. Preferably in the south west to make collection easier. Cheers.

does anyone know If I can take a rb25 big box and it fits straight into the tunnel of a s13 or do I need to cut the tunnel to suit?

RB25 Black Otaku Style inlet + 90mm TB £450 RB25 Crank with Machined Collar (been inspected an collar fitted by power units) £1000 RB25 S1 Block (from an auto car) £1000 RB25 S1 Head complete (damaged) £300 RB25 Sump £150 RB25 Starter Motor £100 RB25 S1 CAS £50 RB25 Engine Loom £150 RB25 Start...

Hey guys doing a motor swap on my s13 currently a sr20de. Putting in a sr20det from a s15. anyone that’s done this before able pm me regarding the wiring. I have both loom/pin outs and have a rough idea what I need to do but would just like to clarify it all before starting thank you

As per the title. Cheap S13. £5k. Runs/Drives. It just needs a little bit of love to put it back on the road after sitting for a few years. Standard car apart from an intercooler. Leave your number and I will call you.

hello, selling my forged ca18det with about 8k km, everything works just fine, compression is checked. selling as a full swap(gearbox, engine, ecu, harness, mounts, manifolds..etc). there is a lot to tell but the main mods are: ARP in all engine CP pistons K1 connecting rods acl sleeves 444cc...

Block cylinders have been rebored by 0.5mm from standard, so now 86.5mm, and honed. Has light coating of oil inside the bores to stop from rusting. No cracks in cylinders, block is in perfect condition. Comes with cradle and all the matching main caps. Has had head fitted since being machined...

Hello. Does anyone know if a 300zx fuel pump hanger/cradle would fit on a 200sx? Can't seem to find any decent s13 ones for sale

Have s13 with pop ups looking for a good set of genuine fenders. Live in Ireland so will need to be shipped

CA S13, has an old Japspeed stainless rad fitted but the problem is it sits high on the drivers side. Looks to be a clash between the bottom hose and the brace that sits below it. Done some digging and the CA and SR have totally different rads, so it can’t be an SR rad. Seems the CA and Skyline...

Hello! After a project S13, I Haven't really got a budget as long as it fair deal! Let me know if anyone has one for sale! Thanks!

Hi.. need a headlamp stalk as the cleanup fix is no longer working. S13 200SX UK Car I can get a brand new on for £60 shipped, but looking at cheaper alternatives. Anyone got one for sale? Thanks

1992 200sx s13 Mot till August 23 1uz v8 swap (done before I got it unknown mileage and history etc) Ruf list Sr20det gearbox S14 hubs all round (just replaced both front wheel bearings) Mishimoto rad Oil cooler R33gtst front brakes Braided lines all-round Polybushed rear subframe Adjustable...

Hi All, Im after any of the following. -Rolling PS13 -Bare S14 Silvia shell -S15 shell complete with panels and lights but no running gear or suspension needed. I know its abit all over the place, please no 200sx's, thank you.

Hi All, Im after any of the following. -Rolling PS13 -Bare S14 Silvia shell -S15 shell complete with panels and lights but no running gear or suspension needed. I know its abit all over the place, please no 200sx's, thank you.

Hi Looking at re-proding the rear arches for my S13 hatch, does anyone have the measurements (angles etc) of the stock rear arch opening? cheers

What's going on guys, I've got some Kazama Auto parts on the shelf here in New Zealand ready to go! These are the same JZX parts that I use in my drift car in Japan! All prices are in GBP and I have shipped parts to the UK before with no issues. The New Zealand Dollar is weak against the...

Evening Anyone going wide with their S13? Parting out a shell? I would like to get hold of the edge from you old rear arches if so!