sr20

The HE351W is the successor of the very well known and notorious HX35W. Featuring extended tip technology (faster spool, higher efficiency) and the 7-blade compressor of course to reach above 60 lbs/min, or +600 hp on gasoline engines! Turbine housing is a twin scroll T3 12cm2 Huge alloy...

I figured 8 years was long enough to wait before putting up a build thread. I’ll try and remember some of the stuff I’ve done to it over the years but most prob just jump into the recent stuff as that’s much more interesting. So back in 2009 when you could pick up s-bodies for pennies I went...

Hi all, I searched and searched on the internet but could not find an answer to my question. I'm about to buy a full Nissan oem gasket kit for my SR20 but as I found, there are 2 different part numbers between s14 and s14a despite there being the same number of parts I understand there are 2...

As title after a ca/sr gearbox. Preferably close as possible to Milton Keynes but can travel a bit further afield. Drop me a message Cash Waiting

Hi Guys, As above for sale is my complete SR20 top mount turbo kit. All parts are band new, the turbo and manifold has been on a running car for all of 5 minutes, hasn't seen any miles or boost or anything of the sort. Included in the kit is: Garrett GTX3071 turbo with .63 housing. It is t3...

Bmw 530D lci individual (facelift) Pictures in comments 2007 Just hit 145k absolutely nothing for these engines Mot till the end of March Full service history (mostly bmw or specilast) Just had an oil service 144k I'm the 3rd owner Been mapped to 260bhp and 690nm with proof Mapped by ecotech...

As titled for vtc engine. Non nats ecu prefered but Im open to anything. Thanks

Got a few parts taking up space that i dont need any more.. IHI turbo, power enterprise PE1420 needs a rebuild but apparently a very good upgrade from the standard t28, Ive not used this personally due to needing a rebuild but done some research on the unit itself and they're decent - £50 2...

Blacktop S14 SR20DET - Hand commander needed ASAP. Give me a shout if you have anything. Located Newcastle but heading south for the weekend. Cheers.

Hi all, I am just wondering what at what temperature should the oil and water be at when idling and at what temperature are they over heating looked all around and can't find a straight answer on the internet. The setup I have is a standard red top SR20DET with standard fan and standard rad...

After an SR20 gearbox bellhousing so I can use my CA gearbox on my SR20 engine. Can pay cash on collection. Ideally close to stevenage as possible. Cheers

It all started back in 2010, i was 21 daily was a mega gay fiesta, Drifting on grid on the xbox in the evenings and watching those crazy touge videos on from japan on youtube, Had a half decent paying job at the time and with a little help from family this happened... 1999 Nissan S15...

Hi everyone, greetings from Latvia. Looking for sr20det gearbox sandwich plate / gearbox flange drawing in electronic format dwg or dxf... Has anyone ever done it ? Canf find that plate from local 200sx users. DWG or DXF or Solidworks or something similar format would be great. I'm looking it...

Hi All, Getting some hesitation, misfiring and juddering from my sr20 when starting to pull in 2nd 3rd and 4th gears. It seems that when I floor it at around 2.5k revs in 3rd thats when its at its worst. From some scientific go fast testing last night im pretty sure its coil packs and when i...

So i have been recently thinking of getting a 1.8 or 2.0 e36 to learn to drift on, after about half a year to a year I would like to swap a sr20 and this is why I came here to ask you guys is it possible? If yes how hard? All answers are appreciated.

Hello, recently I fitted braided fuel lines from the tank to the engine. The old lines were rotten and leaking, but the car would start and run fine. After changing the lines I cant get the car to start up for some reason. Fuel pump in tank is working as I am getting plenty of fuel up to the...

Hi guys, I need to order an SR20 pump as my Altezza pump and rack are bust. I'm going to order an IS200 rack from a breakers yard but i don't know which SR20 pump i need to order (I've been advised i should get an SR20 pump but i don't know any more than this) - could anyone point me in the...

I'm looking for an SR20DET VVT sprocket as I've just developed the annoying rattling sound. If anyone has one for sale please let me know

IDC/BDC Competition Spec S13 Drift Car. Been built this last 4 months - seen less than 150 miles on road this last 2 weeks. Road legal - Long MOT. (June 17th 2017) Video Of Car : (Located in Barnstaple, Devon) ---------- It's completed various events across the uk over the past few years...

Hey! So my sr20 wont start after i left it alone for a weekend. It drove amazing no issues. I have checked all vacum lines. Tested all sparks light blue. Injectors work. It has comp. Have unplugged and reatached the ECU. Running out of ideas. Any tips or tricks are welcome:)! -Z