sr20det

Full S13 exhaust from a 180sx for sale Comes with standard elbow, 3" downpipe, 3" midsection & 3" rear section with 4.5" backbox. No holes, all flanges are straight and cleaned up and just want rid now as I'm keeping the 13 standard. £60 collected from Stoke on Trent

Looking for a stock sr20det turbo in good working order to purchase and collect!

Hi guys need a 350z gearbox adapter for sr20det. Whose got something Thanks

£55 posted to anyone on here, all it needs is a new ground eyelet attatching, the amplifier does have a cracked piece of plastic missing but it still works 100% fine. https://www.ebay.co.uk/itm/202614769529

hey I’ve just purchased a chromoly leightweight flywheel ready to put in with a new clutch on my s14a with an sr20det. Do I need new flywheel bolts for it or can the current ones be used for it? If I need new bolts where can I find them? Cheers Notty

Nissan Sr20-det ignition coil conversion harness + ignitor bypass adaptor. This harness is designed to fit S13, S14, S14A , S15 Plug and play fitment. Complete with the ignitor bypass adaptor. This loom is made with raychem 55A spec wire. Heat shrink sleeving, flex guard oversleeving...

Quick question regarding engine and gearbox mounts, My S15 is running an S14 5 speed gearbox. I need to replace the SR20DET engine mounts and also the gearbox mounts as they're all past their best. Will S15 6 speed gearbox mounts fit the S14 5 speed gearbox or are the mounts different? the...

https://www.ebay.co.uk/itm/202614769529 Will do for £70 posted for anyone who purchases through here and avoids eBay fees but am open to offers can collect if preferred from NN8, Northamptonshrie everything works as it should, ground on harness needs a new eyelet attaching, ignitor does have...

I'm in need of some gearbox bolts if anyone has any! Thanks! Kishan

1x S14 engine loom- £100 1x S14a engine loom- £100 Will consider sensible offers Ideally collected from Salisbury/ Southampton

Wanted a decent condition pair of tomei poncams for s14/s15 sr20det with vct

Hey I just took apart my sr20det and need to replace the intake cam because previous owner messed up the key and buttered it out so I'm thinking I'll just get both cams new. I wanna drift and street it but I have no clue what type of cam specs I should get. Would love some help picking the right...

This is my PS13 that I unfortunately need to sell due to lack of storage space, the engine has less than 4500 miles since it’s rebuild, full spec below. Fully polished and balanced crank Acl bearings brand new Arp head and flywheel bolts all brand new New water pump and all that 1.6 cosworth...

Has around 95k Kms on it, It is currently in my car at the moment, runs great. I have a new fully forged engine already which is in the process of been reassembled. So this one will come out around the end of February middle of March. I thought I'd prematurely see if anyone was interested...

I't's been a while since I've done one of these, and I've been out of the game for a while. Some of you might remember my UK 200sx S13 which I swapped an SR20DET into a couple of years back. That car was rusty from day one and the years of daily driving and crashing up Driftland Bank finally...

Im selling my nismotronic red top ecu with the wiring loom all the sensors , Aem wideband with the gauge , EBC mac solenoid , 3.5 aem bar map sensor , Iat Sensor , 1 switch for hi/low boost , 1 switch for antilag or nitrus , it has boost by gear . Im giving the bluetooth mode and the tablet for...

As per title, I’m after a working alternator & starter motor to fit my sr20det. Can collect if near Dorset or willing to post if you’re further afield. Thanks.

Looking for a complete sr20det package to drop into my s13. Dorset area preferred but can travel for a good spec.

For sale is my sr20 straight can red top, purchased near the start of the year for my ps13 but no longer have the car, has been sat for a long period of time so I’d imagine injectors and such may need looking at, was sold to me as a 56k mile engine but no proof unfortunately, I’ve never run the...

SOLD Here for sale I've got a freshly rebuilt T28 turbo that has had, Full strip down and cleaned core Brand new compressor wheel All new seals & gaskets New journal bearings Uprated 360* thrust bearing Balancing done by Best Turbo’s The exhaust housing also has no cracks at all, which...