Dan200s14 AAA s14a build

dan200s14

dan200s14

Member
Hi people just thought I would start a thread on dw as I thought I had done so already but looking back I clearly haven't :wack:

Right here are some pics of the car herself

One just like her the day I first laid eyes on her

http://i233.photobucket.com/albums/ee147/fcukdan19/396103-3.jpg

This one the weekend after I baught it :-) back in 2007
null_zps0e72336c.jpg

null_zpsb753ac14.jpg

null_zps7f3803d4.jpg

null_zpsb13af818.jpg


Front bumper sprayed

http://i233.photobucket.com/albums/ee147/fcukdan19/03042008057.jpg

http://i233.photobucket.com/albums/ee147/fcukdan19/03042008065.jpg

Fast forwards to just after a minor accident and another respray

http://i233.photobucket.com/albums/ee147/fcukdan19

http://i233.photobucket.com/albums/ee147/fcukdan19

Now except the fuel cap in white too
11ca05b5.jpg

f6e50c63.jpg


2365112f.jpg

a4a8d1a5.jpg


Sadly the engine had been loosing compression and dieing a slow and painfull death :-(
So had to come out!

0a5be592.jpg

0d37f617.jpg


So I've now nearly got up to date on pictures so il just fill you all in on what's happened since!.

She was running 350bhp 368ftlb torque which I was very happy with but had to sell ill my mods to get my new engine and bits.

Good bye list:

Fidenza flywheel & Rps paddle clutch
Gt2871r .64
Hks actuator
Denzo 550 side feed injectors
Nistune ecu board
Z32 afm
Apex engine and tran mounts
Intake hard pipe
+ loads more I can't remember

Parts for build:
Soarer engine and all ancillaries (thanks Cptsideways)
R154 gearbox(thanks to nooty)
Front sump
Ksracing mounts
1jz ksracing bellhousing

ATM I'm in the process of cleaning up my engine bay
Then I will be fitting the engine and box to get a measurement for the prop.
Will try to keep this updated on a regular basis.

Thanks for reading :-)
 
Last edited:
Good project mate. U still got the parts for sale? ive just done a full build, stripped the car to a bear shell, got rid of all the rust, engine rebuild the works check it out on here sumwhere :)
 
No mate all parts have gone now. Just saving to get a clutch setup and prop shaft made. Other than that I need to make an exhaust find a throttle cable and the rest is wiring! Im aiming to get it in running and road worthy within the next 2 months but I'm sure il hits snag
 
Hey mate can you let me no how the ksracing mounts fit need a set for my r32 but no one has a set of jz mounts on the shelf in the uk cheers
 
Ok buddy well I'm hoping it's straight fit. Keep an eye on this thread just incase I get carried away and forget to let you know :)
 
Oh and trial fit the the 1jz mounts just to make sure the holes were big enough!
Which they aren't so needed to just open them a little :)

1d7d3125.jpg
 
Last edited:
Here is the donor car
DD550711-E383-45BD-BDD8-551C52135C93-463-0000005B5B144E28.jpg


Progress this weekend is minnimal but important

cf02f53a.jpg

Engine bay blasted ready for acid etch then zinc primer then high build primer, bit of sanding then paint :-)

9ed9e6f4.jpg

Here we have a picture of the engine block being prepped ready for front Sump conversion
The majority of the sump fitting and drilling has now been done,I say drilling as the sump came from a non turbo engine so we needed to drill the oil return and tap a the thread to attatch it :-)
 
Last edited:
Was this down at Luke's the other week getting getting painted?

Nice looking car fella, I'm only in Cheddar so there's a chance I might see this about some time :thumbs:
 
Gearbox is back out again now to get the linkage extended 3 1/2" and for the flywheel to be fitted and variouse other little bits n pieces but it's coming together :)
 
You must log in or register to reply here.
Back
Top