Toyota aristo build.... single turbo, manual swap.

[Ciaran O Rourke]

Imported a low k aristo from japan last year December 2018.
Going to try something new with a build thread.
Going down the route of single turbo and manual r154 swap.
Going to try push for 500bhp rear wheels
List of mods so far :

2jzgte 60000kms on engine.
Evolution body kit 1 of 250 including rear boot lip spoiler
Lowered on coilovers. Hks fronts and new tein rears.
Engine not messed with running stock boost.
Hks front mount
Supra tt front brake conversion
Apexi twin rear cat back exhaust.
Rare work euroline fs wheels 19x8.5 and 19x9.5 rear.
Everything electric from seats to steering wheel
Full alpine status f1 sound system install with all speakers changed and screen fitted to front console.
Aircon controls moved to arm rest.
Limo tint on rear windows

Here's a couple of photos as it sits now.

 

[Ciaran O Rourke]

Single turbo and r154 manual box with push pull conversion bought and ready to fit.
Hx40 holset turbo.
Equal lenght manifold with 44mm external wastegate.
Cube shifter
Extreme twin plate and flywheel for 2jz.

 

[Ciaran O Rourke]

Single turbo and r154 manual box with push pull conversion bought and ready to fit.
Hx40 holset turbo.
Equal lenght manifold with 44mm external wastegate.
Cube shifter
Extreme twin plate and flywheel for 2jz.

View attachment 301540

View attachment 301541

 

[Ciaran O Rourke]

Turbo and manifold.

 

[Ciaran O Rourke]

If anyone has any information on the manual swap. Clutch pedal position ect. Feel free to comment.
I'm going to try update the thread as best I can with as many photos I can for future reference.

 

[AColman94]

There is a lot of custom in the swap man, custom mounts, prop, cutting holes for shifter, centre console Handbrake etc.

Pedal is a real pain because the cars only came auto, is easier to do at same time as single turbo swap as you have much more space when all of that is removed! Makes it a little easier for making the holes for pedal mounting and Cylinder!

There is some wiring needed for bypassing NSS and getting the speedo/reverse lights working etc

It's just the fact that the Aristo never came manual that makes a manual swap a bit more difficult than say a jzx100.

 

[AColman94]

Should've said I'm also mid swap, Ive box pedal prop mounts and all the single turbo stuff bolted up!

Just need exhaust and intercooler pipes handbrake and a few other small things!

It's slow going but doable!

 

[counteract]

https://www.driftworks.com/forum/th...ta-jzs161-aristo-6-speed-manual-700hp.166563/

 

[anzhar]

where did you gey your manifold from? and price if thats ok

 

[Ciaran O Rourke]

where did you gey your manifold from? and price if thats ok

Bought it from ebay. It was used for fitting of a turbo so brand new. Its a xspower manifold from an American company. Equal lenght headers and 44mm external wastegate.
http://xs-power.com/toyota-turbo-manifolds-35.htm

 

[Ciaran O Rourke]

https://www.driftworks.com/forum/th...ta-jzs161-aristo-6-speed-manual-700hp.166563/

Thanks for this thread. Very useful info.

 

[Boxertricks]

Owned a few Aristo's, really good cars. Manual single should have been out the box but then you'd be talking about a 10k car judging by today's scene tax.

 

[Arussto]

Lovd to see the air conc and head unit set up

 

[Mattvaughan180]

Hey could I ask how do them Xs power manifolds hold up they any good fit wise and build quality? Was looking at one of them for my chaser

 

[Ciaran O Rourke]

Sorry for the lack of updates. I've just got back at the car last night. The xs manifold fits and looks like a well made piece. Haven't had the car back together yet to see how it fares when mapped. But for the money it fits and feels like a good péice of kit.

Got to start the strip down for removal of the engine last night. Hoping to get the engine out this week and start on turbo setup then.

 

[Ciaran O Rourke]

Lovd to see the air conc and head unit set up

This is a few interior pics. Still not sure how the manual swap will work wit gearstick and stuff. The aircon has been previously moved in Japan and is a tidy job.

 

[Ciaran O Rourke]

Auto box is out. Now for the fun part. Fitting the manual r154 in the space.

 

[Ciaran O Rourke]

Choooo Choooo. The holset Hx40 s fitted. Manifold fits a treat. Now to figure out the turbo feed and return lines.

 

[Ortega]

Mother of god! That snail is eating your engine!!!

 

[Ciaran O Rourke]

Engine out fir turbo setup and ease of access to firewall for clutch pedal setup.