91 RX7 FC T2. from barnfind to streetbuild.

TurboFc

Member
soo here's my build thread for my 1991 RX7 T2 thats i've been procastinating for a while now lol.

the car's been in my family for quite a while now. my mum (yes, mum) bought it in perfect condition from a dealership back in 94ish and daily drove it to work and back until 02 when she decided to sell it because of how much it was costing her to run. All the offers she was given were nothing short of a slap in the face so she decided to 'park it up until she could afford to put it back on the road' lol. It then proceeded to sit for 14 years under a lean-to near the sea in Scotland unloved and forgotten about. As it sat near the sea for so long,it had terminal rust and pracitally destroyed it. (I'm yet to see a rustier FC).

the car was never used to its full potential (apart from when my dad drove it on occasions) and was never appreciated like it shouldve been.

heres some photos of it from the for sale ad that was put in the local paper.

img_0228_ea362e15b80b1d70a5930775dbf5193370299352.jpg

img_0487_9c3ea811d89d87230b6c4cca0036fed74946d86e.jpg


and here's how it was looking after sitting for 12 odd years.

21691276_cbcbb317f9fb17e2a0aacde352b13039704b27e6.jpg

img_4144_d78c44e2a96418aead4f9f59e5ac6945ad68ee0b.jpg


fucked.

at this point it was my job to step in and save it before nature completely reclaimed it.

after a little wash it was looking a lot better (ohh how looks can be deceiving lolll)

img_0216_c7187ddb09aa03f4353049a8e9457b47e35f51f3.jpg


after a couple years of waiting, i was able to get it to my house and start work on it. heres some photos of it moving for the first time in 15 odd years. No, not under its own power we didnt dare try starting it. (i later found out the engine was seized anyway)

it was moved on the 8th April 2017.

img_0349_74bea1749afddb415adb413e89b7c4235ac5e59e.jpg


img_0353_7122ee7c3a9736a3a8d8e718a6f01d63aaa60eb1.jpg




img_0355_5d36832bf0144d48ac8f3b34f4fe17b7d2544e10.jpg


looks really bad here. just imagine what its like underneith. :/

img_0369_9b096b3a63c328218b198998cab94b4478127c24.jpg


that lovely rare lip got ripped off as it was towed onto the truck but thankfully wasnt that damaged at all

img_0381_586354cee0da6acb2e70ccf770ba737bdb193893.jpg


aaand its home. the build starts!

img_0383_ed518ccab1a005e2e91581d0568ff8a2680304d9.jpg


after getting it back home, stripping it down commenced. As im sure not many of you want to see photos of that, i'll keep them short. Here's photos of all that lovely rust too. everywhere you look theres chronic rust.

whatsapp_image_2018_05_08_at_20_05_02_0d56ce98be9ef76a85245164c3f5cdc640cc8ff6.jpg

whatsapp_image_2018_12_18_at_13_44_38_654bd4072c8bcb9fedd1a5ab803fa411a8af78a3.jpg

whatsapp_image_2018_12_18_at_13_44_05_df174515517d757614de29e869fdac3fefb2b822.jpg

whatsapp_image_2018_12_18_at_13_45_09_93288618aecbadf9354271c99ea15292d46d94eb.jpg

whatsapp_image_2018_12_18_at_13_46_23_112b2cc9c9b45a947aa3851bd6f26120c4e1913c.jpg

whatsapp_image_2018_12_18_at_13_50_56_4a39055772648e7e3fa40c9984b56f3ad3489d3a.jpg

whatsapp_image_2018_12_18_at_13_50_58_1528d22a7b83ff241d09255682326e4c7b5a325e.jpg

dont think this shells seeing the road any time soon !

soo with that being said, i found a nice clean half caged shell for only £400!! absolute bargain. the previous owner was JJRX7 on here. heres a link to the buildthread of it before i owned it https://www.driftworks.com/forum/th...BVXTCfOuB9NONiTeQvXszItpJnZRULjFT3odc7mYfV66M
whatsapp_image_2018_12_18_at_14_01_33_05677eb869384a3050ddd611f145cdd87d9be981.jpg




whatsapp_image_2018_12_18_at_13_59_02_1__1592989a3a899bd32945da979254ec3e07824788.jpg

of course i had to put all the body bits on to see what it'd look like. i love it.
whatsapp_image_2018_12_18_at_13_59_03_1__ca9595f2a197d59fa77c616d254f8594d005c540.jpg

whatsapp_image_2018_12_18_at_13_59_05_92f7baec21b0f8e25d0d50e1afa709232f10f029.jpg

whatsapp_image_2018_12_18_at_13_59_04_5ca993c54e5e492bd43362391040c5d335006639.jpg


i'll post more progress of it another time.
 
Pretty sure I've been following this on insta. Respect to you for hoping to save that first shell, but it was definitely far too gone. Be cool to see this when it's done!
 
when i read you hadnt seen a rustier one i was like narrrrrrr...

then i looked at the pics and was like dammnnnn

can not wait to see the future of this build

good luck
 
For a second I thought you were actually going to try patch up all that rust!
That pic from the front with the mk 1s is pure sex. Looks like I got another rx-7 to follow.
 
Good to see E123LYL is still out there :)

Not sure why it was stripped as it was running when I sold it and just needed paint and a few little bits.

EDIT: Just had a look at the thread you bought it from - not sure who told him it was a Turbo II it wasn't the EGI engine blew just after the owner before me got it and was rebuilt under warentee by Hurley rotary, it was always an EGI the turbo II bonnet and a load of turbo II spares were picked up separate for it as I was going to convert it to a turbo engine.
 
Last edited:
sorry for the long awaited update, not done a huge amount on it. its been slow work
got the front harness all rerouted and tucked. moved the big loop going round the engine bay to behind the dash and extended the plugs i need for things like the lights and pop-up motors to underneith the wing.

also made a little plate to relocate the solenoids that were just behind the front bumper to where the abs computer used to be. engine bay should look super clean once i strip the engine harness of the bs and run it through the top of the transmission tunnel :euge:
WhatsApp Image 2019-03-09 at 20.51.12.jpeg
WhatsApp Image 2019-03-09 at 20.47.03.jpeg
WhatsApp Image 2019-03-09 at 20.47.03(1).jpeg
 
had time to burn in college so i cleaned up the LIM and made block off plates. definitely not at the top of the to-do list but its another job done lol

WhatsApp Image 2019-03-09 at 20.45.56.jpeg


i also got the shell off the cinder blocks and moved it over in the garage to setup a wee sandblasting bit in the corner. lets see how long this lidl sandblaster lasts. ;)
also fINALLY got *almost* all the suspension stripped down and bushings removed. im thinking of going bronze, black and silver as the paint scheme for it all .
if anyone can post what bushing setup theyre running on these? struggling to find a setup that works well without any binding or wack suspension issues.

looks real ugly right now but hopefully wont for too much longer... :smokin:

WhatsApp Image 2019-03-09 at 21.15.44.jpeg
 
Last edited:
cheers everyone for the comments, gives me that little bit more motivation to actually get shit done lol.
ay nice to find more of the previous owners; got anymore pics of it? @Ste00
 
Last edited:
shell and a few suspension parts have just been sent away to be mediablasted and epoxied. will be back next tuesday :euge:

WhatsApp Image 2019-05-01 at 11.49.58(2).jpeg


WhatsApp Image 2019-05-01 at 11.49.58.jpeg


WhatsApp Image 2019-05-01 at 11.49.59.jpeg
 
got the shell back a couple days back but the c*nts made an absolute arse of it. runs left right and centre, many bits havent even been blasted , tried covering the bits he hadnt with buckets of paint and he didnt even paint over some of the bits he missed. lazy as fuck.:no: paid him £900 so i expected a bit better!
thankfully, hes agreed to reblast it and im getting a mate to primer it and help do the body work

WhatsApp Image 2019-05-06 at 01.35.31.jpeg
WhatsApp Image 2019-05-06 at 01.35.34(1).jpeg
WhatsApp Image 2019-05-06 at 01.35.32.jpeg


WhatsApp Image 2019-05-06 at 01.35.33(1).jpeg
WhatsApp Image 2019-05-06 at 01.35.34.jpeg

although it was a poorly done job, the shell is indeed VERY solid and the blasting didnt reveal any nasty surprises. theres two 10p holes in the sills and thats it so i'll get them welded up pronto.

also the once very rusty suspension bits are looking brand new :euge: i'll send them off for powdercoating some other time :smash:

WhatsApp Image 2019-05-06 at 01.54.46.jpeg
WhatsApp Image 2019-05-06 at 01.54.47.jpeg
 
Last edited:
Back
Top