FC Tuning in Holland - Session 8

Status
Not open for further replies.
rock ! finally mapping it! haha that took a while. ill try and get the new car done for this, it will need mapping then
 
Updated again !!

The list the list

Saturday Sessions

1/ Rick J - S13 - RB25DET
2/ Albert K - S13 - CA18DET
3/ Laurens N - P11 - SR20VE (with either Emanage Bl. or Nistune+Ostrich)
4/ Dieter Coopman - S14 - SR20DET


Sunday Sessions (overlap)

5/
6/

Reserve
7/
 
yes patrick .. they are fine.. no problem. So long as they are clean, flow tested and match up well. What size are you considering?
 
Ok thanks.

740cc if they're still available.

It's for SR2ODET with HKS GT-RS. What will be the duty cycle at 1.5-1.6 bar? I don't want if they are maxed out or above 80% duty.

Thanks
 
ahhh.. you'll be more than fine, will be around 75% PEAK, based on the last few that ive logged :), assuming its running factory cylinder head & factory FPR

with that turbine you'd want 740s at a minimum anyway, thats what I recommend

:thumbs:
 
Ok cool.
Only the head is sleightly uprated. Poncams with type A springs, rocker arm stoppers, adjustable cam sprocket and cometic head gasket.

Thanks
 
The list the list

Saturday Sessions

1/ Rick J - S13 - RB25DET
2/ Albert K - S13 - CA18DET
3/ Laurens N - P11 - SR20VE (with either Emanage Bl. or Nistune+Ostrich)
4/ Dieter Coopman - S14 - SR20DET


Sunday Sessions (overlap)
5/ Rob Meulenbroeks - S14a - SR20DET (FCTuningNistune ECU Solution)
6/

Reserve
7/
 
Hi Guys,

i just registered and this is the first time i joined a forum :$ .
i have a 1997 s14 SR20DET with bolt on upgrades and Nistune ecu. Yesterday i contacted Steve from FCTuning for remapping my car. He notified me about the tuning session @DP Engineering. Can i still join this session?

kind regards,
Vish
 
Hi Vish..

Welcome to Driftworks my friend :dw::dw: :) and see ill be seeing you no doubt in Europe very soon also...:thumbs:

McLarenboy will fill you in on the finder details in dutch.. (Cheers McLaren):smokin:
 
Updated !!

Saturday Sessions

1/ Rick J - S13 - RB25DET - PFC
2/ Albert K - S13 - CA18DET - (FCTuningNistune ECU Solution)
3/ Laurens N - P11 - SR20VE (with either Emanage Bl. or Nistune+Ostrich)
4/ Dieter Coopman - S14 - SR20DET (FCTuningNistune ECU Solution)


Sunday Sessions (overlap)
5/ Rob Meulenbroeks - S14a - SR20DET (FCTuningNistune ECU Solution)
6/
 
Last edited:
Thx to both of you , Steve and Mclarenboy.

@Mclarenboy , i registered at sxoc.nl this morning , just waiting for activation. waar moet zoeken op de forum? ik kon het niet niet zo snel vinden?
 
expect an email from me over the weekend guys.. ill do my best to try and get it out to you all tonight.. looking foward to catching up with old and new faces yet again next weekend

Steve & Raymond
 
steve_fctuning said:
expect an email from me over the weekend guys.. ill do my best to try and get it out to you all tonight.. looking foward to catching up with old and new faces yet again next weekend

Steve & Raymond
Click to expand...

Didnt get any email, when I try to mail you I get an error saying the mailbox is full.
 
i know.. ill be sending it this eve. :)

that was a first.. never had my mailbox full before lol

anyway. its emptied out now and accepting incoming messages as of 2pm this afternoon ;)
 
Hi guys,

i should put my name in the list right? if not pls , correct me.
realy looking forward to this weekend :D

Vish


1/ Rick J - S13 - RB25DET - PFC
2/ Albert K - S13 - CA18DET - (FCTuningNistune ECU Solution)
3/ Laurens N - P11 - SR20VE (with either Emanage Bl. or Nistune+Ostrich)
4/ Dieter Coopman - S14 - SR20DET (FCTuningNistune ECU Solution)


Sunday Sessions (overlap)
5/ Rob Meulenbroeks - S14a - SR20DET (FCTuningNistune ECU Solution)
6/ Vish C. - S14 (zenki) SR20DET (Nistune)
 
correct

a timetable has been sent to all of you now for the 2 day session :)

see you all in a few days

looking forward to it.. me and Ray may rustle up a BBQ if the weather is good, like last time.. fingers crossed the sun shines bright for everyone.. il bring the Hot Sauce!!
 
Status
Not open for further replies.
Back
Top