The one and only Greg ProTuner will be mapping it... don't give a shit what anyone says, he's the best for 1j drift use engines imo.
My setup is pretty much same as Dylan's, im getting same ecu, same turbo, etc.. So we'll use Dylan's map as a base map, then make adjustments for the bigger injectors I'll have so it runs ok, then take it to Greg to map properly.
Dylan is quite capable of doing a pretty good map, and obviously I have close ties to EuroSpec who also map very well, but Greg has a lot lot more experience mapping drift cars.. It's all about mapping the constant on/off throttle.. and mapping it simulating the higher temps it'll be running at etc.. It's all very technical and I don't want anyone else to do it. End of.
My setup is pretty much same as Dylan's, im getting same ecu, same turbo, etc.. So we'll use Dylan's map as a base map, then make adjustments for the bigger injectors I'll have so it runs ok, then take it to Greg to map properly.
Dylan is quite capable of doing a pretty good map, and obviously I have close ties to EuroSpec who also map very well, but Greg has a lot lot more experience mapping drift cars.. It's all about mapping the constant on/off throttle.. and mapping it simulating the higher temps it'll be running at etc.. It's all very technical and I don't want anyone else to do it. End of.
reeperR32
Drift-Street-Imports
no greg is very good no question about that... mines being mapped in jan but not by greg... found someone with better prices tbh
cefiro_drifta
Mad pointing Munky
yeah because thats what you want in a mapper, someone cheap . Bit like getting a tattoo, fuck the respected and reknown one for good work BRING ME THE CHEAPEST RAAAAAAAAAAAAAAA make my tiger chasing a dragon look like a down syndromed kitten eating a gecko
reeperR32
Drift-Street-Imports
cos ive found someone cheaper than greg you think he'l be shit.... lol
ummm ok martin @ mb is mapping it... hardly shit id say!!!
edit
notice how i said "better prices"
reeperR32
Drift-Street-Imports
pipe down dale...! your reply to my original question seemed all defensive (not sure why, i was just asking a question)
and im replying to mikes post, whos arguing...lol
and not debating whos a better mapper blah blah blah, i couldnt care less... i chose to use martin because he is good just like greg is good...
you could have just answered my original question with one word "greg"
cefiro_drifta
Mad pointing Munky
edit
notice how i said "better prices"
well i would imagine that "better price" means cheaper unless your someone who thinks a better price is more !?!?!?!?!?!?!?!? not sure
reeperR32
Drift-Street-Imports
cheaper doesnt mean CHEAP!!!! ie implying im saving pennies to get some cheap nasty map...
anyway i dont want dale to start frothing at the mouth because we're arguing on his thread
Ste333
"The Shoulder"
cos ive found someone cheaper than greg you think he'l be shit.... lol
ummm ok martin @ mb is mapping it... hardly shit id say!!!
edit
notice how i said "better prices"
pipe down dale...! your reply to my original question seemed all defensive (not sure why, i was just asking a question)
and im replying to mikes post, whos arguing...lol
and not debating whos a better mapper blah blah blah, i couldnt care less... i chose to use martin because he is good just like greg is good...
you could have just answered my original question with one word "greg"
cheaper doesnt mean CHEAP!!!! ie implying im saving pennies to get some cheap nasty map...
anyway i dont want dale to start frothing at the mouth because we're arguing on his thread
What has any of this got to do with the project itself? Stop spamming fools! The mans happy to pay the extra and has obviously chosen Greg based on his own reasoning. End of
Last edited:
Forgot to put this small update up...
Welded up my new 12cm exhaust housing... Was Internal Wastegate, iv converted to External Wastegate.
Made a plug to go in to old internal gate flap hole so on the inside of the scroll is smooth, didn't want a crevis inside to disturb the flow of gas..
I also made a plate and welded it in over the gap left for the internal gate to vent back into the exhaust, I saw this gap as something that will disturb the free flow of the exhaust gas, with the plate welded in the gas will just flow on passed..
Welded up my new 12cm exhaust housing... Was Internal Wastegate, iv converted to External Wastegate.
Made a plug to go in to old internal gate flap hole so on the inside of the scroll is smooth, didn't want a crevis inside to disturb the flow of gas..
I also made a plate and welded it in over the gap left for the internal gate to vent back into the exhaust, I saw this gap as something that will disturb the free flow of the exhaust gas, with the plate welded in the gas will just flow on passed..
jon07043278
Well-Known Member
Lovely fabrication there 
xborninthefightx
JZX BOSS
what manifold are you using. Really having a hard time finding one, myself.