The Wheel fitment thread:
- Thread starter Dylan
- Start date
sideways.taff
- www.tafftune.com -
Tucked wheels look gash. I'm deffo not one for having "mega tyte" fitment, but if its tucked, its gay
I disagree
http://www.driftworks.com/forum/883219-post3.html
BillyFIVE
hooolyschmokes
flush and tucked motherscratchers!
The digits as it stands at the mo.. 17x9 +30 at the rear and 17x9 -0 at the front (with the spacers) 225/45 all round. It's not perfect yet. I need shim the rear about 4mm as the clearance between the semi-trailing arm and wheel edge is too close for comfort and I need at least another 5mm on the spacers at the front to make it deathproof as they are silly close to the coilovers. That should end up at about +26 at the back and -5 at the front. There's plenty of room to be made at the front with the hammer on the arches as they are only slightly bashed in at the moment. Getting there..
The digits as it stands at the mo.. 17x9 +30 at the rear and 17x9 -0 at the front (with the spacers) 225/45 all round. It's not perfect yet. I need shim the rear about 4mm as the clearance between the semi-trailing arm and wheel edge is too close for comfort and I need at least another 5mm on the spacers at the front to make it deathproof as they are silly close to the coilovers. That should end up at about +26 at the back and -5 at the front. There's plenty of room to be made at the front with the hammer on the arches as they are only slightly bashed in at the moment. Getting there..
adriansr32
New Member
Skyline offfset
hi anybody got 18X9.5 on d front of an r32 standard wings with 225 40 rubber wats d best offset for dis?
hi anybody got 18X9.5 on d front of an r32 standard wings with 225 40 rubber wats d best offset for dis?
John Fallon
Member
I run 225/40/18 on a 9.5x18 ET30 on my R32 up front and it's pretty flush
samburton4
Member
tryed a set of ford wheels on the bk of my s13 and they kinda didnt work
sideways.taff
- www.tafftune.com -
18x11.5j et-24 and 18x9.5j et-6 dont fit a slightly flare arch'd S13
They go on an R324 with some persuasion...
They go on an R324 with some persuasion...
sideways.taff
- www.tafftune.com -
Would be a piece of piss to tuck weak rims..
Tuck some 11.5j et-24 and I'll offer some praise .. my car is now 6ft4" wide 
touch my wang.richardc-s
Member
mk1 mx5, 15x8 et10 Rota RBR's, 9.5mm rear spacers and 5mm fronts. Front and rear arches rolled.
Rears
Fronts
Rears
Fronts
Last edited:
DtheBUK
Active Member
Rear 12j et -3 245,45,17 bolt on arches + roll&flare.
Front 9j unknown 235,45,17
Only 5mm spacer needed on the front to clear caliper!
more pictures needed!
