My RB27 Hcr32 t51r power!

[HuDeani_R32]

right its rougly 65mm across its defo been rebuilt recently as its brand new almost lol

Edit
Been reading up the stock size is 66mm so looks like I have a rebuilt stock one which is fine as its still going to give more power and as its basically brand new I don't have to worry about it and its miles better than my turbo atm

 

[HuDeani_R32]

bit of an update. im still waiting for my engine stand and quite a few bits to turn up for the rb27! and im also waiting for all the gaskets to come for the new turbo for the rb20. but the otherday the last manifold stud on no.6 snapped off so i got that blowing now haha. good job i was going to change the turbo soon but got the fun job of changing all of the studs now! :/ anyone got any tips for this?

 

[HuDeani_R32]

got a couple of bits in the post today
Some bride fabric for the door cards

A genuine nissan exhaust gasket (still waiting for the turbo gaskets and head studs)

and then i have been modding the coil pack cover

before
and after

going to be painting it along with a few other bits like the cam cover and plenum and other bits!

 

[dirty-diesel]

dude you must have deep pockets or a maxed out credit card lol good work tho. whens the 26 going in?

 

[HuDeani_R32]

lol the 26 wont be going in for a little while yet as i still got a few bits to buy like
Nitto oil pump
forged rods
maybe new bearings
new rings
rb25 box
twin or tripple plate clutch
2wd hi capacity sump
ross crank damper
bigger brakes!
then all the bits like starter motor power steering pump and odds n sods haha! but hopefully in a couple of months ready for the summer!

i still gotta get the bodywork and wheels sorted. Going to get the rb25 turbo and new bolts and gasket on 1st though then going to retrim the inside of the car and try and get some rails for the brides.

 

[dirty-diesel]

ill have to swing by take a looky

 

[siderider]

looking good mate

 

[.:pingu]

ah man where did you get the bride fabric from?

 

[HuDeani_R32]

The same guy I got the seats from on eBay but it was the only red fabric on eBay I could find worldwide! I got more than enough to do a couple of sets of doors if U want some

 

[.:pingu]

ah thanks mate but i was after the black and grey material they do. thanks for the offer tho

 

[mojo]

Great project dude!!!

 

[HuDeani_R32]

still waiting for the new turbo gaskets to turn up but ive had a few other parts come in

wont be much progress for a couple of weeks due to work but as soon as i can ill get cracking fitting parts and painting and things!

 

[haza88]

conceptua tuning do stronger than standard exhaust studs to prevent future brakes and they have a torques head on them for easy fitting!

As for getting the old snapped ones out once u got the mani out the way centre punch the broken threads (get it dead centre) drill a nice hole then gently tap either a easy out or male torques socket in there and they should unscrew and come out

 

[HuDeani_R32]

Cheers harry although I already have the studs so im not too fussed about how long they last as U know it won't be in the car long enough to worry about that haha!! Might come in handy on the rb27 though.

And does anyone know how I can change the title on this thread to something a bit more accurate??

 

[V-con Pro]

Hows it goin man the 26 looks like it came with some sweet parts!!

That rb25 turbo is completely stock mate, still has the ceramic exhuast wheel, besides that they are ball bearing from factory and are not rebuildable.

The mines rocker cover baffle kit is a really good investment for the rb26, best to take yours apart and make sure the factory ones havent had the wire gauze removed from inside anyway.

 

[HuDeani_R32]

Yeah it came with quite a bit! Its for os giken cam gears. R34 crank. Some big cams think they are hks. Rc 1000cc injectors. Je 87mm pistons. Hks fuel rail. And loads of other bits. got a few bits to get still. Going to put a head drain kit on and bits like that. Will look into the baffles aswell!

 

[HuDeani_R32]

small update
Got my bolts in to mount the engine to the stand so that will go up and i can crack on fitting parts and stripping it down for paint etc!
And i have a couple more bits for it
Billet fuel pump clamps

and a holder for the power fc controller

Has anyone thats nearby got a engine lift i could borrow for half hour to get the engine up on the stand? theres a bag of chips in it for you if there is lol

 

[dingdong]

looks like a epic build iv asked around no one has one! did u ask the locaL hire station? ask harry he had one to put his not sure it was his tho

 

[HuDeani_R32]

Yeah will try the hire station at the weekend if im not working. Then I can start working on the thing and get it stripped down and get the parts out for powder coating! Just not sure on what colours to go for!

 

[andyfloss]

looking good mate.. R32 FTW