My RB27 Hcr32 t51r power!

Small update! Due to the weather being shocking and the fact I havnt had any free time all I have been able to do it buy a few bits lol!

Some shinny new bolts for the engine bay!
temporary_zps05a869c4.jpg


And some new arms that's are more road friendly instead of the driftworks ones! Going to see if I can change the bushes on them for some poly bushes though! And the plan is to after I have done all the bodywork and the engine buy the complete set of gk-tech arms for her!
temporary_zps1efd47ec.jpg
 
Right managed to get a little bit done!
off with the old!
temporary_zps1fea1ea9.jpg


On with the new!
temporary_zpscadc43e4.jpg


I also got some new Whiteline rear camber arms for a really good price!
temporary_zps301f72ac.jpg


I have also just got my hands on an CAD drawing for a new aero component! which im currently waiting on some prices for it to be cut out and made! if that goes well i might be getting a few made to sell on! :P
 
Last edited:
ERRRRRRRMMM!!! i may have just accidentally just bought some new wheels which make my rotas look like halfords specials....... i wont give anything away yet unless i get enough interest lmao!! but all i can say is they are very mediocre.....
 
Picked up my First prototype rear diffuser today!!! Its cut to fit a r33 gtr and so i will be using this to mock up one to fit my 32!
temporary_zpsbc054996.jpg

temporary_zpsa292f08c.jpg
 
Well got the new wheels sorted... 18x10et 14 front and 18x11.5 et8 rear.... the car is still on the jack in the pics so they arnt sitting where they will. And the fronts need a 10-15mm spacer to clear the calipers lol
Right pic time lol
temporary_zps86d3df23.jpg

temporary_zps278111b4.jpg

temporary_zpsb17e7f55.jpg

temporary_zps891d1008.jpg

temporary_zps80c6fc6d.jpg

temporary_zps480c7266.jpg

temporary_zps518b7f0e.jpg

temporary_zpsf4b94814.jpg

temporary_zps93af71ad.jpg

temporary_zps97cbbbae.jpg
 
Last edited:
Well I may have just read this from start to finish, Very impressed!

I need to crack on with my 32 ASAP!
 
Yes i can get more diffusers made as i have the cad file for them! but as yet i still need to make the one for the 32 but once thats done i might be selling some :) and cheers! im not too keen on the ratzingers actually! so might be swapping the centers out for something else haha!
 
Decided the ratzingers dont work on my 32 so decided to pick these up to use to swap the centers out with my ones!
w1_zpsb2c91d3f.jpg


And will look like this when i have swapped them over
temporary_zpsee9c1f2d.jpg


I have also got a few polybushes for the car. Still need the subframe ones and a couple of others though. And a front Whiteline arb, Will get the rear to match also
temporary_zps0a6bf646.jpg
 
Stuck my Bride in today!

temporary_zps3254648b.jpg


Also i have just ordered myself a nice new cage from fabricage! got a while to wait till its done but pics will follow once its here!
 
got the skirts fitted on both sides the other day! fitted really well! just need more time to finish up a few bits then she can go off for the rear arches t be done and then to be finished!
temporary_zps92626438.jpg

temporary_zps1a3a5073.jpg
 
Last edited:
Not much to report at the mo other than got some work vs-xx's to polish up and rebuild with gold bolts and new lips to make them 10j and 12j!

temporary_zpsfa17cb9b.jpg


And also got a new cage from Fabircage to put in!

temporary_zps9cc692a0.jpg

temporary_zpsd543e49b.jpg
 
You must log in or register to reply here.
Back
Top