Driftworks GeoMaster Hub Knuckles

It was asked earlier in the thread but never answered:

What about ABS?
There are a few "roadracers" interested in these knuckles as well. But some of us what to keep the ABS as it's great for rainy trackdays.

I can see that the holes for the ABS sensor is not present. Is there room to add the holes? Do you have any picture of the front knuckles from the back?

/Marcus
 
ChristianBS said:
IMAGE_750.jpg
Click to expand...
please compelte list of these parts and prices from dw shop!
tnx
 
Ozy, it's much easier if you just go on the shop and add everything you want to your cart, then you can get a shipping price too and place the order, otherwise we're just doing everything twice! :)
 
Bon Bon said:
Ozy, it's much easier if you just go on the shop and add everything you want to your cart, then you can get a shipping price too and place the order, otherwise we're just doing everything twice! :)
Click to expand...
I don't know what all parts are/ or don't understand exactly what is "in package" so I need full drift.spec suspension parts listed except coilovers..

I know that I need adjustable set arms front and rear, those geomasters and caster arms (tension rods)..
Maybe there is more to be offered from your side that could be useful to me..

thats the reason but never mind, I'll check on shop.
 
Well that photo shows the equivalent of a four arm kit, front and rear lower arms, and a set of our geomaster knuckles. :)

I'll discuss your other options in a reply to your e-mail.
 
now going to place an order for both team cars, what tention rods do you reccomend also would tein tie rods & ends work with these.

1x car is on bc coilovers the other apex gen 2's will they go long enough?
if not i could have a alloy spacer made up to go under topmount, would that work?
 
They are shit coilovers but will still work with geo masters dude


i advicr on tein steering arms as they are stronger and have longer thread and yes will work fine


but icing on the cake would be the geo master offset rack spacers then u really would have best steering setup out there :-)
 
already chopped n moved the rack on both cars. the apex gen 2's came with my car. there brand new n ive gotta get it up to spec for bdc most importantly. but will be replaced with cs2's at some point.:nod:
 
Get gtr tension rods and where the rose roint end fits at front spacer it more inwards this will allow extra wheel clearance
 
do these take the OE sized bushes? as i already have sphericals i would like to keep and re-use.
and do you have any pics of how the drum handbrake fits?
 
blingcommander said:
do these take the OE sized bushes? as i already have sphericals i would like to keep and re-use.
and do you have any pics of how the drum handbrake fits?
Click to expand...

They don't I'm afraid, they take a bespoke sized bush.
Fitting sphericals wouldn't be a problem, easier in fact as the housings are larger.

The drum brake fits like a stock hub :)
 
kam Jong-il said:
They don't I'm afraid, they take a bespoke sized bush.
Fitting sphericals wouldn't be a problem, easier in fact as the housings are larger.

The drum brake fits like a stock hub :)
Click to expand...
dang. what is the ID of them then? i'll have to see if i can get sleeves machined up.

do you have any pictures as to how they fit? looks to me like you need to flip them upsidedown and side to side and cut up the backing plate to fit
 
You must log in or register to reply here.
Back
Top